Saviola ABS Edgebanding For Wide-Panel Edges in Eucalipto White
This is the manufacturer-matched ABS edgebanding for SALT Saviola panels in Eucalipto White (GSDB1), supplied in the 65 mm width for panels that demand a broader edge coverage. The 328-foot production roll and 1 mm thickness suit shops running continuous edgebanding operations where color accuracy and edge consistency are non-negotiable.
Key Features
- Manufacturer-matched color in Eucalipto White (GSDB1) ties the cut edge directly to the Saviola panel face in the same decor.
- 65 mm width provides ample coverage for thicker panels and leaves generous overhang for flush trimming on both faces.
- 1 mm ABS construction delivers a durable, impact-resistant edge that holds up to everyday cabinet use.
- Laguna finish aligns the surface texture and sheen of the banding to the Eucalipto White panel face for a seamless visual transition.
- Chlorine-free ABS polymer clears specifications that restrict PVC materials in commercial and institutional work.
- 328-foot roll keeps a production shop running through a substantial run without mid-job changeovers.
Where This Edgebanding Earns Its Place
The 65 mm width is the right call whenever the panel being edged is thick enough that a 23 mm or 43 mm band would leave the trimmer working at the edge of its overhang tolerance. It also suits edge profiles that benefit from extra material — a slight roundover or a bevel trim both need more stock to work with than a square flush-trim operation. On a tall wardrobe carcass or a thick commercial shelf where the exposed edge is plainly visible, color fidelity matters as much at the edge as it does on the face. Manufacturer-matched banding in the same Laguna finish eliminates the guesswork of sourcing a close third-party color and eliminates the visible mismatch that results when the finish or gloss level drifts.
Material and Construction
ABS — acrylonitrile butadiene styrene — is the preferred polymer for European decorative panel programs precisely because it is chlorine-free. Where a project specification excludes PVC, ABS clears that requirement without requiring any product substitution or approval. At 1 mm the banding is thick enough to resist a direct corner impact and thin enough to track through a standard edgebander feed without additional setup. The Laguna finish on this roll matches the surface character of the Saviola Eucalipto White panel: the same texture and gloss level mean the edge does not compete with the face when the cabinet is assembled and installed.
Who Stocks This Roll
Cabinet shops running Saviola panels in Eucalipto White will want this roll on hand before cutting starts. The 328-foot length is a production quantity, suited to a shop that works through multiple sheets of the same color in a run rather than edging a single cabinet at a time. Designers and contractors specifying GSDB1 panels for commercial interiors, closet systems, or retail fixtures can call out the matching edgebanding alongside the panel to keep the submittal clean and the color consistent from face to edge across every component.
Does this banding require a specific adhesive or machine setup?
This roll is supplied without pre-applied adhesive and is intended for use with a standard edgebander glue pot. It feeds through conventional edgebanding equipment without modification. Confirm the machine's feed gap accommodates 65 mm width stock before running.
Can this banding be used on panels from other Saviola collections in a similar white?
The color and finish are matched specifically to Eucalipto White (GSDB1) in the Saviola collection. Using it on a different collection's white panel may produce a close result, but the Laguna finish texture and gloss level are tuned to this decor. Request a sample comparison before committing to a cross-collection application.
Is matching HPL available for Eucalipto White to carry the color onto a countertop or work surface?
Matching high-pressure laminate is available for the Saviola collection. Saviola HPL ships in two sheet sizes — 73 inch by 120 inch and 60 inch by 120 inch — so a shop that cannot handle the wider sheet has a workable option. Confirm the specific color availability for GSDB1 at the time of order.
What is the difference between the 65 mm width and the narrower 23 mm or 43 mm rolls in the same color?
Width is selected against panel thickness and edge profile. The 23 mm width suits 19 mm panels on a square flush-trim edge. The 43 mm width covers thicker stock and leaves more room for a routed profile. The 65 mm width is the right choice for the heaviest panels in this program or wherever the trimming operation calls for maximum overhang on both faces.
The Right Edge Closes the Job
A color-matched, finish-aligned edge band is the last detail between a cut panel and a finished component. Stocking the manufacturer-matched roll in the same color as the panel means that detail never holds up the work.
