Artwood Texture Meets a Precise Edge Fit
This is matching ABS edgebanding in Canyon Oak (GSD17), produced by SALT International to pair with Saviola Canyon Oak decorative panels. The 43 mm width covers the cut edge of a standard panel thickness and trims flush on both faces, delivering a finished edge that reads as part of the panel rather than an addition to it. The Artwood finish carries the same textured, wood-character surface as the panel face, so the color and tactile quality continue around the edge.
Key Features
- ABS polymer construction is chlorine-free, making this banding compatible with specifications that exclude PVC.
- 43 mm width gives enough overhang on a 19 mm panel to trim flush and clean up both faces in a single pass.
- 328-foot roll provides production volume for a shop running multiple cabinets or a full closet build in this color.
- 1 mm thickness applies through standard edgebander settings without requiring special tooling or pressure adjustment.
- Artwood finish matches the textured, naturalistic surface of the Saviola Canyon Oak panel face for visual and tactile continuity.
- Color-matched to GSD17 Canyon Oak in the Saviola collection, so face and edge close out as one surface.
Where This Edgebanding Works
Canyon Oak is a warm, mid-tone wood decor suited to kitchen cabinetry, closet systems, retail fixtures, and commercial casework where a natural grain character reads well. The 43 mm width is the right call when the panel being banded is a standard 19 mm board — the overhang leaves enough material to trim and scrape without going short. For thinner panels or solid-wood lipped work, check whether the 23 mm roll in this color suits the build better. This roll length is sized for production runs: a shop building a full kitchen or a run of closet units in Canyon Oak can work through the job from one roll without splicing.
Material and Surface Character
ABS edgebanding is the preferred polymer for fine color and texture matching because its dimensional stability holds the emboss through the heat of application. Unlike PVC, ABS is chlorine-free, which satisfies green building specifications and jobsite programs that flag halogenated materials. The Artwood finish is not a flat wood-print surface — it carries a textured relief that picks up the grain character of the Canyon Oak decor, so a raking light across the cabinet edge does not expose a flat band against a textured face. The 1 mm caliper is the standard for machine application; it runs through most edgebander models without adjustment.
Who This Roll Is For
Cabinet shops running Saviola Canyon Oak panels as a stocking color are the primary buyer here. The 328-foot roll is a production quantity — it suits a shop that goes through this color regularly and wants to keep material on hand rather than ordering roll by roll. Custom shops building a single large project in Canyon Oak will also find the roll sized right for a full kitchen or bedroom suite without left-over waste that sits unused. Designers specifying Canyon Oak across a commercial interior can confirm the match is factory-produced in the same program as the panel, which removes the guesswork of a third-party color approximation.
Does this banding require a hot-melt glue pot, or does it come pre-glued?
This roll is not pre-glued and is intended for machine application with a separate hot-melt adhesive. If you need iron-on banding for site repairs or small runs, a pre-glued product is the better choice.
Is this the only width available in GSD17 Canyon Oak?
Canyon Oak edgebanding is also stocked in 23 mm, which suits thinner panels and edge-banding over solid-wood lipping. The 43 mm roll is the right width for 19 mm panel stock where full-face trimming is the plan.
Will this banding meet a specification that prohibits PVC?
Yes. ABS is chlorine-free and is the standard choice for specifications that exclude PVC or halogenated materials. Confirm the project's exact language, but ABS satisfies the most common PVC-exclusion clauses.
How does the Artwood finish hold up on an applied edge compared to the panel face?
The Artwood texture on the banding is produced to match the panel face, so the visual and tactile character carry through. Normal cabinet use — wiping, handling, light impact — is within what ABS banding handles well. The edge is not a high-wear horizontal surface, so longevity in a typical vertical cabinet application is not a concern.
A Finished Edge That Holds the Color Story
Matching factory-produced edgebanding in the same Canyon Oak decor means the color program closes out cleanly — no visible seam between face and edge, and no approximation in the grain character. For a shop committed to this color, keeping a roll on hand is the simplest way to make sure the edge never holds up a job.
