SM'art ABS Edgebanding for Bold, Dark Casework
This SM'art ABS edgebanding in Noir (SMIN90) brings the deep, dark edge treatment that wide, dark decorative panels demand. At 43 mm wide, the strip is sized for thicker panel stock, trimming flush and clean so the finished edge disappears into the face rather than reading as a separate component. The Intagli finish carries the texture and tone of the SM'art panel program, producing a consistent surface from face to edge.
Key Features
- 43 mm width provides ample overhang for clean trimming on thicker decorative panel stock.
- 1 mm ABS construction is chlorine-free, clearing specifications that exclude PVC materials.
- Intagli finish matches the SM'art panel collection texture and tone for a seamless face-to-edge read.
- SMIN90 Noir color pairs directly with the SM'art Noir panel in the same decor program.
- 328-foot production roll supports high-volume cabinet runs without mid-job roll changes.
Where This Edgebanding Works Best
Dark cabinetry programs rely on the edge treatment as much as the panel face, and a mismatch between face and edge breaks the visual read of an otherwise clean design. This Noir banding is the correct match for SM'art Noir panels, so the cut edge carries the same depth and texture as the show face without requiring color correction or secondary finishing. It suits cabinet boxes, door frames, shelving, and any component where the cut edge will be visible and handled. Because the Intagli finish is a specific SM'art texture, it also reads consistently when multiple components meet at a corner or at a joint.
The 43 mm width is the right selection for panels where the trim allowance on a narrower band would be marginal. It gives the edgebander room to clean up both faces without risking a short edge on one side.
ABS Construction and Finish Details
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a chlorine-free polymer that satisfies specifications ruling PVC out of a project. The material takes an iron-bond or machine-applied hot-melt well, and at 1 mm thickness it handles the mechanical demands of a production cabinet edge without telegraphing the seam line. The Intagli finish is not a gloss surface — it carries the textured character of the SM'art collection, which means it resists showing handling marks more readily than a high-gloss edge would. The Noir tone is a deep, near-neutral dark that reads consistently under both warm and cool light sources.
Right for High-Output Dark-Finish Cabinet Work
A 328-foot roll is a production quantity. Small shops finishing a single dark cabinet job may find the roll length more than the job requires, but for cabinet shops running Noir as a program color, the long roll keeps the edgebander loaded and the job moving without constant changeovers. Design professionals specifying SM'art Noir for a full kitchen, a retail fixture run, or a commercial millwork package can call out SMIN90 in 43 mm with confidence that the edge will match the panel color on delivery. The combination of a specific color code, a confirmed collection match, and a chlorine-free material makes this band straightforward to specify into a project document.
Does this edgebanding require a specific adhesive or machine setting?
ABS edgebanding bonds with standard hot-melt EVA or PUR adhesive on any production edgebander, as well as with pre-applied hot-melt for manual iron-on application. Follow your machine manufacturer's recommended temperature range for 1 mm ABS stock.
Is this the correct match for SM'art Noir panels in the SALT International collection?
Yes. SMIN90 is the SM'art program color code for Noir, and this edgebanding is produced in that decor with the Intagli finish to match the panel face.
Why choose 43 mm over a narrower band for the same color?
The 43 mm width gives a greater trim allowance and suits thicker panel stock where a 23 mm band leaves little margin. If the panel is a standard 19 mm board and the edge is square, either width covers the core — the 43 mm just provides more working room on the edgebander and a cleaner result on thicker material.
Can I use this banding with non-SM'art panels in a similar dark color?
The color match and Intagli texture are engineered for the SM'art Noir panel program. On a different panel collection, the tone and texture may be close but is not guaranteed to read as a precise match.
One Roll, One Color, One Less Variable
Getting the edge right on dark decorative panels is where a lot of casework falls apart at close range. Specifying the collection's own banding in the correct color code closes that gap before the panel is cut.
