12" x 96 Teeth Non-Melt Plastic Saw Blade, 30mm Bore

When cutting acrylics and plastics, "chip-welding" - a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2? negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

A soft plastic cardboard made with super soft super flexible PVC. A polystyrene foam board bonded between two layers of Luxcell wood-fiber veneer. Decorative high-pressure compact laminate (HPL) with an integral surface.

Excellent for Cutting:
• Plastics
• Acrylonitrile Butadiene Styrene (ABS), Acetal, Acrylic, Acrylic Sheets, Alu panel
• Copolymer, Coroplast, Correx Boards, Corrugated Polypropylene
• Delrin
• Ethylene-Vinyl Acetate
• Foam Board
• Gatorfoam
• High Density Polyethylene (HDPE), High Impact Polystyrene (HIPS), High Pressure Laminates (HPL)
• Low Density Polyethylene (LDPE), Lucite
• Mechanical/Engineered Plastics
• Nitrile Rubber
• Nylon
• Perspex Cast Acrylic Sheet, Plastic Laminate Flooring, Plexiglas, Poly (methyl methacrylate) (PMMA), Polycarbonate (Lexan), Polyethylene (PE), Polyethylene Terephthalate (PET), Polyethylene Terephthalate Glycol-Modified (PETG / PET-G), Polypropylene (PP)
• Solid Surface
• Styrene-Acrylonitrile
• Styrene-Butadiene Rubber (SBR)
• Styrene-Isoprene-Styrene (SIS)
• Teflon, Thermoplastic Polyolefin (TPO), Tressa Meteon
• Ultra High Molecular Weight Polyethylene (UHMWPE)
• Wood