Gran Tour ABS Edgebanding For Clean, Consistent Ice-White Edges
This is the factory-matched ABS edgebanding for the Saviola collection in color GSA80 Ice, supplied in a 23mm wide, 1mm thick, 328-foot roll. It carries the Gran Tour finish from the panel face onto every cut edge, so the finished component reads as a single, continuous surface rather than a faced board.
Key Features
- Saviola collection color match: Produced to coordinate with GSA80 Ice panels in the Gran Tour finish family.
- ABS construction: Chlorine-free polymer that clears specifications where PVC is restricted.
- 23mm width: Sized to trim flush on standard 19mm panels with enough overhang to clean up on both faces.
- 1mm thickness: Suited to automated edgebander application for a durable, consistent bond line.
- 328-foot production roll: Covers multi-cabinet runs without interruption for a roll change.
- Gran Tour finish: Surface texture coordinated to the panel emboss for a matched appearance at the edge.
Where This Edgebanding Fits the Job
Ice is a clean, neutral white with the Gran Tour texture — a finish that appears in contemporary kitchen cabinetry, closet systems, and commercial millwork where a consistent, low-distraction surface is the goal. When GSA80 Ice panels are cut to size, the raw edge exposes the core. This matching band closes that edge so the component presents the same color and texture on every visible face. It is the detail that keeps a run of doors or drawer fronts reading as finished work rather than shop-cut parts.
The 328-foot roll is practical for cabinet shops running multi-unit jobs. A single roll covers the edging on a significant run of parts without a stop, which matters when feed speed and glue temperature are set and the operator wants to run through without interruption.
Material and Construction
ABS polymer is the standard banding material for European decorative panel programs, chosen because it is chlorine-free and dimensionally stable enough for precise color and gloss matching. Where a project specification rules out PVC — increasingly common in commercial and healthcare work — ABS is the correct choice and PVC is not a substitute. The 1mm thickness is the standard for automated edgebander application: thick enough to resist impact on a cabinet edge, thin enough to profile cleanly without building up at the corner. The Gran Tour finish on the face of the band is coordinated to the texture of the matching Saviola panel, so the edge and the face share the same surface character under light.
Who Reaches for This Roll
Cabinet shops running Saviola GSA80 Ice panels are the primary buyer. The match is specific — Gran Tour is a defined finish family, and an unmatched band on an Ice panel will show a texture or sheen difference that a close substitute cannot hide. Design-build firms specifying a contemporary white palette across a full kitchen or commercial interior reach for matched components to close out the detail without a visible seam at the edge. Smaller shops doing one-off jobs still benefit from the 328-foot roll: white is a running color, and leftover footage stays useful on the next job.
Is this banding pre-glued, or does it require a separate adhesive?
This roll is not pre-glued. It is designed for application through an edgebander using a hot-melt adhesive system, which is standard for production-volume cabinet work.
Can this banding be used on panels thicker or thinner than 19mm?
The 23mm width trims flush on 19mm stock and leaves adequate overhang on panels slightly thinner. For significantly different thicknesses, confirm the width provides enough overhang before running a production batch.
Why specify ABS instead of PVC banding for this color?
ABS is chlorine-free, which satisfies specifications that prohibit PVC. It also holds a tighter color and gloss match to the panel face than many PVC alternatives, which is important on a light, neutral color like Ice where any sheen variation is visible.
Does matching HPL exist for the Saviola collection in this color?
Matching high pressure laminate sheets are available for the Saviola collection. Contact us to confirm current availability in GSA80 Ice specifically.
Edges That Disappear Into the Design
A matched edge is the finishing step that lets the panel do its job. This roll puts the right color, texture, and material at the edge of every GSA80 Ice part so the surface reads through without interruption from face to edge.
