Wide Format and High-Production Fit for a Clean Ice Finish
This 65 mm ABS edgebanding in Saviola color GSA80 Ice brings the Gran Tour finish to the widest standard banding width in the collection, sized for thicker panels and tall-profile edges where a narrow strip falls short. Sold on a 328-foot production roll, it is the right call when a job runs long or a shop wants to stock one color and move without reordering mid-run.
Key Features
- 65 mm width covers thick panels and oversized profiles with material to trim flush on both faces.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and holds a tight color match to the decorative panel face.
- Gran Tour finish matches the specific texture and sheen of Saviola's Gran Tour surface family, so the edge reads as one continuous surface.
- GSA80 Ice color is a clean, neutral tone that suits contemporary cabinet interiors and open shelving where the edge is part of the visual.
- 328-foot production roll supports high-volume runs without the interruption and adhesive variation that comes from splicing shorter rolls.
- Saviola collection match means the banding is produced by the same panel maker, giving a finish-level match a third-party color cannot replicate.
Where the 65 mm Width Earns Its Place
Most edgebanding decisions come down to panel thickness, and 65 mm exists for the jobs where 23 mm is too tight and 43 mm is borderline. A thick slab door, a post-formed shelf edge with a radiused profile, or a panel stack that finishes proud of a frame all demand overhang on both faces to clean up properly. At 65 mm, there is enough material to trim flush against a 19 mm or thicker panel and still have margin for a clean scrape. The Gran Tour finish on this strip was engineered to align with the texture of Saviola Gran Tour panels, so the edge does not read as an afterthought under raking light or close inspection. For open shelving, cabinet ends, and face frames where the edge is fully visible, that registration is the difference between a finished product and an assembled one.
ABS Material and Gran Tour Surface
ABS banding is the standard for European-origin decorative panel programs, and for good reason: it is chlorine-free, which matters on any project where the specification restricts PVC, and it holds dimensional stability through temperature and humidity variation far better than vinyl. The Gran Tour finish on this roll is not a generic matte or gloss — it is the specific surface character Saviola uses across its Gran Tour panel family, with a matched texture and sheen. Running a close third-party color on a Saviola panel produces a visible step at the edge under certain lighting. Running the manufacturer's own banding eliminates that step. At 1 mm thickness the strip feeds cleanly through any standard edgebander and trims without chipping.
Right for High-Volume Cabinet and Millwork Operations
A 328-foot roll is a production quantity. It suits a cabinet shop running a sustained color, a millwork operation building out a commercial interior in Ice, or a distributor stocking for a multi-phase project. The roll length also reduces splice points, which is where adhesion variation and color banding irregularities tend to appear on a finished run. Smaller shops and one-off jobs that need the 65 mm width but cannot use 328 feet of one color should verify whether the short roll is available in this width before committing. Shops already running Saviola panels in GSA80 Ice will find this roll drops into their workflow without a color-matching step.
Does this banding require a special adhesive or edgebander setting?
ABS banding at 1 mm runs on any standard hot-melt edgebander without modification. Use the same EVA or PUR glue pot setting you would for any ABS strip at this thickness. No special primer is needed on a flat-pressed TFL panel edge.
Is this the only roll length available in 65 mm for GSA80 Ice?
The 328-foot roll is the standard production roll for this width. Availability of shorter rolls in 65 mm varies — contact the sales team to confirm current stocking before ordering for a smaller job.
Will this banding match Saviola panels in GSA80 Ice from a different thickness or sheet size?
Yes. The color code GSA80 and the Gran Tour finish are consistent across Saviola panel constructions. Whether your panels are 18 mm or 19 mm, A/B or A/A, the banding color and texture are produced against the same standard.
Can this banding be used on non-Saviola panels in a similar color?
It can be applied to any panel edge mechanically, but a precise color and texture match is only guaranteed against Saviola panels in GSA80 Ice with the Gran Tour finish. On a different panel brand or a different finish family, a sample check against your actual panels is the only way to confirm the result before a full run.
One Roll, One Color, No Mid-Run Interruptions
When a job is running GSA80 Ice across a full cabinet suite or a commercial interior, having 328 feet of matched banding on a single roll means the color stays consistent and the work keeps moving from the first cabinet to the last.
