Artwood Finish Decorative Panel for Open Casework and Room-Visible Surfaces
The Saviola Canyon Walnut A/A decorative panel brings a structured, tactile walnut grain to both faces of the sheet, making it the right choice whenever a finished surface needs to read correctly from either side. At 8 mm thick and sized at 83-5/16 inch by 110-1/4 inch, this TFL panel suits tall cabinet boxes, open shelving, dividers, and any component where the back face is as visible as the front.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade construction means both faces carry the same Canyon Walnut decor to the same appearance standard, so neither side needs to be hidden.
- Artwood finish is a textured, embossed surface that follows a wood-pore structure, adding depth and tactile character to the walnut grain pattern.
- Thermally fused laminate (TFL) face bonds the decorative paper directly to the core under heat and pressure, with no glue line to open at the cut edge.
- 83-5/16 inch by 110-1/4 inch sheet at 63.79 square feet per sheet gives tall-format parts and full-height closet components room to nest efficiently.
- CARB2 compliant hardwood particleboard core holds machine-driven fasteners cleanly and meets formaldehyde emission requirements on commercial and residential specifications.
- Matching ABS edgebanding is available in this color, so cut edges close in the same Canyon Walnut decor without a visible seam.
Where This Panel Fits the Job
An 8 mm A/A panel occupies a specific place in a cutting list: it is thin enough to keep a cabinet box light but finished on both faces, which opens it to applications an A/B panel cannot cover. Open shelving units where the underside of each shelf is always visible, room dividers that face two spaces at once, and freestanding display cases all benefit from a panel that presents the same face in every direction. The sheet size also favors tall components. A full-height closet side, a pantry wall panel, or a long retail fixture back can often be cut from a single sheet without a width joint, which keeps both the labor count and the visual seam count down.
Surface, Core, and Construction
The Artwood finish is a tactile emboss that traces a wood-pore structure across the face, giving the Canyon Walnut print depth that a flat-pressed surface cannot match. Because the emboss is a physical relief rather than a printed effect, it holds its character under raking light and changes the way the panel reads in a lit display or under track lighting. The TFL construction fuses the face to the particleboard core as a single layer, which means the decorative surface does not delaminate at the edge the way a post-bonded sheet can. The CARB2 hardwood particleboard core keeps the panel flat across a wide run and accepts confirmat screws, cam locks, and shelf pins at standard boring patterns without pre-drilling oversized holes.
Who Orders This Panel and Why
Cabinet shops running open-box designs or furniture-grade cases reach for an A/A panel when the back of the box will be seen from inside a room or from an adjacent space. Fixture builders working on retail or hospitality millwork use it where a partition or display unit faces traffic on both sides. Designers specifying a walnut-grain program across a full interior find that a consistent Artwood texture ties wall panels, cabinet fronts, and open shelving into a single material story. At 8 mm, the sheet is also light enough that a solo installer can handle a full-height panel without a second set of hands on every lift.
What does A/A mean on this panel?
A/A indicates that both faces are finished to the same appearance grade in the Canyon Walnut Artwood decor. Either face can be the show face, which is what separates this panel from an A/B construction where only one face is decorative.
Is matching edgebanding available for Canyon Walnut?
Yes. Matching ABS edgebanding is available for this color, sold separately by the roll. It closes the cut edge in the same Canyon Walnut decor so the panel reads as a solid component rather than a faced board.
Can this panel be used for cabinet interiors and exteriors in the same project?
It can. Because both faces carry the same finish, a single sheet can yield parts that show on the outside of a case and parts that show on the inside, which simplifies the cut list and keeps the material consistent throughout.
How does the Artwood finish differ from a standard matte TFL face?
Artwood is an embossed texture that follows a wood-pore structure, so the surface has physical relief you can feel. A standard matte face is relatively flat. The Artwood emboss adds depth under directional light and makes the walnut grain read more convincingly at close range.
Is matching HPL available for Saviola Canyon Walnut?
Yes. Saviola matching HPL is stocked in two sheet sizes: 73 inch by 120 inch and 60 inch by 120 inch. The 60 inch sheet works for shops that cannot handle the wider format. Order the size that fits your equipment and your cut list.
A Walnut Panel That Works From Every Angle
When both sides of a panel are part of the design, an A/A construction in Canyon Walnut Artwood removes the constraint of planning around a hidden face, and lets the whole sheet contribute to the finished work.
