Artwood Texture And Open-Grain Character For Furniture-Grade Casework
The Saviola Canyon Walnut panel delivers a deep, tactile wood-pore surface on both faces, finished in the Artwood texture family on a 19 mm CARB2 hardwood particleboard core. At 83-5/16 inch x 110-1/4 inch, this A/A-grade A/A sheet is sized for tall cabinet runs and full-height door sets where visible edges appear on front and back alike.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade pair: both faces carry the Canyon Walnut decor to the same appearance standard, so either side can show without a secondary operation.
- Artwood finish: a pronounced open-pore emboss that follows the walnut grain structure and reads as depth under raking or directional light.
- 19 mm CARB2 hardwood particleboard core: holds confirmats and cam locks cleanly and clears the formaldehyde requirement on standard commercial specifications.
- 83-5/16 inch x 110-1/4 inch sheet: 63.79 square feet per panel, sized for full-height parts with a usable offcut for shelves or stretchers.
- Thermally fused laminate face: the Canyon Walnut decor is fused directly to the core, with no glue line to open at a cut edge.
- Matching ABS edgebanding available: closes the cut edge in the same Canyon Walnut decor so the panel reads as a solid component after banding.
Where Canyon Walnut Works In A Build
Canyon Walnut's warm brown tones and open-pore relief make it a natural fit for contemporary kitchen cabinetry, bath vanities, and entertainment units where a wood-look face needs to hold up under close inspection. The Artwood emboss is deep enough to cast a shadow at the grain line, which keeps the panel reading as wood even under the strong overhead lighting common in showrooms and open-plan kitchens. Because this is an A/A panel, it handles open-shelf applications, room dividers, and island cabinet sides where the back face is fully visible — no flipping, no laminating a second sheet.
The 19 mm thickness pairs with standard cabinet hardware and European hinge boring without adjustment, and the sheet's fractional dimension nests efficiently against common door and drawer-front cut lists. Shops running a long Canyon Walnut program will find the 63.79 square feet per sheet works well for estimating across a full kitchen or closet spec.
Construction Built For The Cut List
The hardwood particleboard core holds a machine-driven fastener without pre-boring and takes a clean saw cut at the panel edge. CARB2 compliance is built into the core, which covers the formaldehyde documentation step on most residential and commercial submittals. The TFL face is fused under heat and pressure — there is no adhesive layer to telegraph through the surface or lift at a routed profile. Artwood texture is applied in the same pressing operation, so the emboss depth is uniform across the full sheet.
Cut edges expose the raw core, and the Canyon Walnut color program includes matching ABS edgebanding to close them. ABS is chlorine-free, which keeps the finished cabinet clear of PVC restrictions in specs that call that out.
The Right Panel For Wood-Look Specification Work
Cabinet shops specifying a walnut-look program for residential kitchens or commercial break rooms will find this panel covers the full face-and-back requirement without extra steps. Designers who need a convincing wood character in a repeatable, factory-consistent surface use Saviola TFL to avoid the color variation that comes with real veneer. The A/A grade pair is the call when the job includes open shelving, visible cabinet ends, or A/A door panels — anywhere a B-grade back would require a workaround. Homeowners sourcing for a renovation can order by the sheet and have the panel cut to a custom door schedule without waste from sidedness constraints.
Frequently Asked Questions
What does A/A mean on this panel?
Both faces carry the Canyon Walnut decor to the same appearance grade. Either face can be the show face, which is what separates this panel from an A/B sheet where the back is held to a looser standard.
Is matching edgebanding available in Canyon Walnut?
Yes. Matching ABS edgebanding is available for the Saviola collection in this color. ABS is chlorine-free and applies on a standard automatic or manual edgebander.
Does the Artwood texture align with the printed grain?
The Artwood finish is a pronounced open-pore emboss that follows the walnut grain structure, giving the face tactile depth that reads under directional light.
Is matching HPL available for this Saviola color?
Yes. Saviola matching HPL is stocked in both 73 inch x 120 inch and 60 inch x 120 inch sheets, so shops that cannot handle the wider format have an option.
Can this panel be used for a bathroom vanity?
The hardwood particleboard core is suited to dry and intermittently damp interior environments typical of bathroom cabinetry. It is not rated for direct or sustained water exposure.
A Panel That Earns Its Place On Both Sides Of The Sheet
Canyon Walnut in the Artwood finish gives a fabricator a factory-consistent walnut character on every face, every sheet — no matching required, no second-side lamination, and a cut-edge solution already in the program.
