An A/A Panel Built for Casework That Shows From Both Sides
The Saviola Rovere Grigio panel in the Vetta finish is an A/A (A/A) TFL decorative panel sized at 83-5/16 inches by 110-1/4 inches and built on an 8 mm core. Both faces carry the same gray oak decor, making it the right call whenever a component is visible on two sides — open shelving, room dividers, cabinet backs in glass-door applications, and freestanding fixtures where no face can hide.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/An A/A construction means both faces present the Rovere Grigio gray oak decor, so no secondary operation is needed to finish a visible back.
- Vetta finish is a textured TFL surface that adds tactile depth to the wood-look decor without requiring any additional coating in the shop.
- 8 mm thickness positions this panel for back panels, door insets, and lightweight interior components where a full 19 mm sheet would be excessive.
- 83-5/16 inch by 110-1/4 inch sheet size yields 63.79 square feet per sheet, sized to nest tall cabinet components with minimal waste.
- Thermally fused laminate face bonds the decorative layer directly to the core — no glue line at the edge, no delamination risk in normal shop handling.
- Matching ABS edgebanding is available in the Rovere Grigio decor, so cut edges close cleanly to the same color.
Where This Panel Earns Its Place on the Cut List
At 8 mm, this panel fits jobs where panel weight and thickness matter as much as appearance. Back panels in frameless cabinet boxes, sliding door insets, display case backs, and decorative dividers in retail fixtures are natural applications. Because both faces are finished identically, the panel works in open-display contexts — a shelving unit viewed from the aisle, a room divider in a commercial interior, or a wardrobe back that faces into a living space. The gray oak color reads as a warm neutral that pairs with both light and dark door programs, giving a designer room to mix across a project without the back panel becoming a problem to solve.
Construction and Surface Character
Rovere Grigio translates to gray oak, and the Vetta finish delivers that character through a textured TFL surface with enough emboss depth to register visually under ambient light. Thermally fused laminate fuses the decorative paper to the substrate under heat and pressure, making face and core one continuous material. There is no adhesive interface to open, no edge where a film can lift, and no finishing step left for the shop. The 8 mm format keeps sheet weight manageable for single-person handling and reduces the load on lightweight cabinet backs and sliding hardware. Because the core and surface are part of the Saviola program, the panel ships CARB2 compliant.
Who Reaches for This Panel
Cabinet shops building frameless boxes with glass or open fronts specify this panel to close the back without sacrificing the interior view. Commercial fixture builders use the A/A construction for gondola backs and display dividers that face traffic from both directions. Designers specifying a hospitality or retail interior reach for Rovere Grigio when the brief calls for a gray wood tone that works with metal accents and matte hardware. At 8 mm, the sheet is also a practical choice for a millwork shop cutting prototype panels or working a budget-sensitive residential job where back-panel material cost is a real line item.
What does A/A mean on this panel?
A/A means both faces carry the same decorative surface to the same appearance standard. Either face can be the show face, which is what makes this panel suitable for components visible from both sides. It is not an A/B panel with a plain backer.
Is there matching edgebanding available for Rovere Grigio?
Yes. Matching ABS edgebanding is available in the Rovere Grigio decor through the Saviola collection. ABS is chlorine-free and meets specifications that exclude PVC banding.
Can this 8 mm panel be used as a cabinet box side or shelf?
The 8 mm thickness is well suited for cabinet back panels, sliding door insets, and decorative dividers. For structural box sides and shelves that carry load, a 19 mm panel is the standard choice. Use this thickness where weight reduction and finished appearance on both faces matter more than structural depth.
Does this panel come with matching high-pressure laminate for countertops?
Matching HPL is available in the Saviola collection. The Saviola HPL ships in two sheet sizes — 73 inch by 120 inch and 60 inch by 120 inch — so shops that cannot process the wider sheet still have an option.
How many square feet does one sheet cover?
One sheet at 83-5/16 inches by 110-1/4 inches covers 63.79 square feet. That figure is the published sheet area. Usable yield after cutting depends on your layout.
Rovere Grigio Ready to Work
A gray oak panel finished on both faces and sized for efficient nesting gives a shop one less problem to manage on a tight job. Cut it, band it with the matching ABS edgebanding, and install it — both sides already done.
