Saviola TFL Panel For Open Casework and Double-Faced Components
The Saviola Rovere Grigio panel in the Vetta finish is an A/A-grade, A/A thermally fused laminate sheet sized at 83-5/16 inches by 110-1/4 inches in a 19 mm thickness. Because the decorative face appears on both sides, this panel is the natural choice whenever an edge, shelf, or partition will be seen from more than one angle.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/A grade construction means both faces carry the full decorative specification, so either side can face out.
- Rovere Grigio color (GSDH2) delivers a gray-toned oak decor suited to contemporary and transitional cabinet work.
- Vetta finish is the Saviola surface texture for this decor, providing consistent sheen and emboss across the sheet.
- 19 mm panel thickness aligns with standard confirmat fasteners and 23 mm edgebanding on a square edge.
- 83-5/16 inch by 110-1/4 inch sheet size yields 63.79 square feet per sheet for estimating and pricing.
- Matching ABS edgebanding is available in this color to carry the Rovere Grigio decor onto cut edges.
Where This Panel Fits the Work
An A/A panel earns its place on any component where concealment is not an option. Open shelving in a kitchen or retail fixture shows the underside as plainly as the top — an A/B panel would expose a plain backer there, while this sheet reads correctly from every angle. Room dividers, freestanding wardrobes, and island end panels share the same requirement. The gray oak character of Rovere Grigio works across a wide range of door styles and hardware finishes, sitting comfortably alongside matte black, brushed brass, and satin nickel without competing with any of them.
At 83-5/16 inches by 110-1/4 inches, the sheet is sized to nest full-height cabinet parts efficiently. Shops laying out tall upper cab boxes or pantry components will find the sheet length accommodating without unusual saw setup.
Surface, Core, and Construction
The Vetta finish is a Saviola surface program that marries a defined texture to the Rovere Grigio decor. Thermally fused laminate fuses the decorative paper directly to the board under heat and pressure, so there is no separate glue line at the face and the edge stays tight through normal shop handling. The 19 mm particleboard core is CARB2 compliant and holds a machine-driven fastener reliably across the sheet. Both faces are built to the same A-grade appearance standard, which means consistent color and texture whether the panel faces a client or a wall stud.
Matching ABS edgebanding in Rovere Grigio is available for this color, letting the cut edge read as part of the same surface rather than exposing the core. ABS banding is chlorine-free, which satisfies specifications that exclude PVC.
Right For Shops Running Contemporary Gray-Oak Interiors
Cabinet shops building handleless contemporary kitchens, walk-in closet systems, and commercial millwork will find Rovere Grigio a flexible neutral that anchors a palette without overpowering it. Designers specifying coordinated interiors can carry the same decor from vertical panels through shelving and into the edgebanding, keeping every surface in the same family. For volume runners, the large sheet format reduces the number of lifts needed to complete a standard cabinet run, which matters when the shop is processing multiple kitchens on the same schedule.
Frequently Asked Questions
What does A/A mean on this panel?
A/A means both faces are finished to the A-grade decorative standard — the same decor, texture, and color on the front and the back. Either face can show without a second operation or a separate backer.
Is matching edgebanding available in Rovere Grigio?
Yes. Matching ABS edgebanding is available in this color for the Saviola collection, in the roll widths and lengths the program carries. Order it alongside the panel so edges and faces share the same decor.
Does the sheet size work with a standard 4 x 8 saw setup?
The 83-5/16 inch by 110-1/4 inch format is larger than a 4 x 8 sheet in both dimensions, so confirm your saw capacity before ordering. Most sliding table saws and beam saws handle this sheet without modification.
Can this panel be used for cabinet box construction as well as doors and exposed ends?
Yes. The 19 mm thickness and particleboard core are standard for cabinet box construction, and the A/A grade means interiors are as finished as exteriors — useful in open-frame or frameless work where the box interior is visible.
Is matching HPL available for Rovere Grigio?
Matching high-pressure laminate is available for the Saviola collection and ships in two sheet sizes — 73 inch by 120 inch and 60 inch by 120 inch. Confirm the size that works for your shop's processing width before ordering.
One Panel, Every Visible Face Covered
Rovere Grigio in the A/A Saviola panel means the gray oak decor follows every component through the cabinet — top, bottom, back, and end — without a separate grade decision for each face.
