Wide Coverage and a Deep-Toned Match for Thick Panel Work
This 65mm ABS edgebanding in the Saviola collection's GSP25 Uva color is designed for panels where the standard 23mm band simply does not reach. At 54 feet per roll and 1 mm thick, it gives cabinet shops and millwork operations the band width to cover thick substrates and expose a finished edge that reads flush with a deep-toned decorative face.
Key Features
- 65mm width gives full coverage on thick panels with room to trim flush on both faces without leaving the core exposed.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and well-suited for specifications that exclude PVC.
- 54-foot short roll is sized for focused runs and single-job use without committing to a full 328-foot production coil.
- GSP25 Uva color in Vanguard finish matches the Saviola TFL panel program so face and edge read as a continuous surface.
- Saviola collection sourcing means the banding is produced to coordinate with the same Saviola panel decor available through the same program.
Where the 65mm Width Earns Its Place
Most edgebanding selections stop at 23mm or 43mm because those widths cover the panels those shops run most often. The 65mm band exists for situations that those widths do not handle cleanly: thick substrates built up from double panels, structural panels bonded together for a heavier component, or a design that specifies a thick slab-look element where the edge itself is a visible design feature. On a thick panel, a narrower band trimmed flush still leaves a sliver of core showing at the top or bottom face. The 65mm band eliminates that problem by starting wider than the finished edge needs to be, so the trim operation produces a clean face-to-edge transition on both sides. The 54-foot roll is the right unit for a project quantity rather than a production run, which keeps the investment proportional to the job.
ABS Material and Vanguard Finish Construction
ABS polymer produces edgebanding that is chlorine-free from the start, which matters on commercial and institutional work where specifications routinely exclude PVC. The 1 mm thickness adds enough body to survive machine application and edge trimming without the band thinning out at the cut line. The Vanguard finish on this color coordinates with the surface character of the Saviola panel in the same decor, so the banding does not read as a separate element at the joint. Color consistency between panel face and edge band is a function of purchasing from the same program: GSP25 Uva in the banding is keyed to GSP25 Uva in the panel.
The Right Shop and the Right Job
This roll fits best in a cabinet shop or millwork operation that is already running Saviola GSP25 Uva panels and needs a band wide enough for non-standard stock thickness. It also suits a designer or contractor specifying a thick-edge detail in a deep-toned color who wants a factory-matched band rather than a close approximation from a third-party source. The 54-foot short roll is a practical quantity for a single installation or a small run, and it avoids the commitment of a full production coil when the job does not justify it.
Why does this come in a 54-foot roll instead of the full 328-foot production roll?
The 54-foot roll exists for jobs that do not use enough banding in one color to justify a production quantity. It is the right size for a single project or a small batch in a color that the shop does not run constantly. If the volume is there, the 328-foot roll is the more efficient buy.
Will this band apply on a standard edgebander?
Yes. ABS at 1 mm runs on the same equipment used for PVC banding of similar thickness. Feed speed and glue pot temperature settings for 1 mm ABS are typically close to those for 1 mm PVC, though confirming with the machine manufacturer for your specific model is good practice.
Is this the right band for a 19mm panel?
It will cover a 19mm panel with extra width to trim, but 23mm banding is the standard match for a 19mm substrate. The 65mm band is sized for thicker panels or thick-edge design details. Using it on standard thickness stock is not wrong, but a narrower width is more material-efficient for that application.
Does matching Saviola panel in GSP25 Uva need to be ordered separately?
Yes. The panel and the edgebanding are separate line items. This listing covers the 65mm banding only. The Saviola TFL panel in GSP25 Uva is available separately in the same program.
One Color, Edge to Face
When the panel and the banding come from the same collection and the same color code, the edge stops being a detail to manage and becomes part of the finished surface — and that is exactly what the GSP25 Uva 65mm roll delivers on a thick-panel build.
