Saviola TFL Panel For Open Casework and Two-Face Applications
The Saviola GSP42 Coral Sand decorative panel is a 19 mm A/A-grade thermally fused laminate sheet finished identically on both faces, sized at 83-5/16 inch x 110-1/4 inch. Because both the front and back carry the same Laguna finish in the Coral Sand decor, the panel is the right call wherever a component will be seen from both sides — open shelving, freestanding room dividers, cabinet boxes with visible interiors, and furniture pieces where the back panel lands in plain sight.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade pair: both faces carry the same Coral Sand decor and Laguna finish, so either side can show without a secondary operation.
- Laguna finish: a textured TFL surface that adds subtle tactile depth to the warm neutral tone of the Coral Sand decor.
- 19 mm thickness: a standard cabinet-box dimension that pairs directly with 23 mm ABS edgebanding and accepts confirmat and shelf-pin hardware without modification.
- CARB2 hardwood particleboard core: the core meets California Air Resources Board Phase 2 formaldehyde limits and holds machine-driven fasteners cleanly across a flat run.
- Large-format sheet: the 83-5/16 inch x 110-1/4 inch nominal sheet covers 63.79 square feet per panel, reducing the seam count on tall or wide casework runs.
- Matching ABS edgebanding available: Saviola offers matching edgebanding in this decor to close cut edges and keep the color reading as a single surface.
Where This Panel Works
The A/A construction makes this panel productive on components that have no hidden face. A cabinet box built from it shows a consistent Coral Sand interior and exterior without applying a separate backer or a secondary finish to the inside. Island and peninsula cabinet runs benefit the same way: the end panel facing the room and the side facing the interior of the run are the same surface. Open retail shelving, library casework, and display cases are natural fits. The warm, light neutral of Coral Sand reads well under a broad range of lighting and pairs cleanly with both natural wood accents and white or off-white companion panels.
Material and Surface
Saviola panels fuse the decorative paper directly to the hardwood particleboard core under heat and pressure, creating a TFL surface with no separate glue layer and no edge where the face can lift from the substrate. The Laguna finish on this panel adds a light embossed texture that catches directional light and gives the surface a presence that a flat matte face does not. The hardwood particleboard core machines predictably at the router table and the saw, holds a confirmat screw without pre-boring, and keeps the sheet flat across its full length without racking or bowing. At 19 mm, the panel thickness aligns with standard North American cabinet-box practice.
Right Shop, Right Project
Cabinet shops running residential or light commercial millwork will find the large-format sheet reduces cut waste on tall door surrounds, full-height closet panels, and deep base-cabinet sides. The A/A grade works especially well for furniture makers and fixture builders whose designs expose the back face as part of the aesthetic. The Coral Sand color occupies a warm, sandy-neutral territory that reads as neither strictly beige nor pink, which broadens the palette it can share with without a sample review becoming a sticking point. Homeowners and designers sourcing panels for a renovation can match the color to coordinating edgebanding and specify the same decor across both panel and edge without a custom order.
What does A/A mean on this panel?
A/A is the grade pair for this panel, meaning both the front face and the back face carry the same Coral Sand decor in the Laguna finish. Either face can be the show face — there is no backer or secondary surface. This is different from an A/B panel, which has a decorative front and a plain balancing sheet on the back.
Is matching edgebanding available for Coral Sand?
Yes. Saviola offers matching ABS edgebanding in the GSP42 Coral Sand decor, sold separately by the roll. ABS banding is chlorine-free and compatible with specifications that restrict PVC. Confirm the width against your panel thickness when ordering.
Is matching HPL available in this color?
Matching high pressure laminate is available for the Saviola collection and ships in two sheet sizes: 73 inch x 120 inch and 60 inch x 120 inch. Both are stocked, so shops that cannot handle the wider sheet can order the 60 inch option without a special order.
What is the square footage of one sheet?
One sheet at 83-5/16 inch x 110-1/4 inch covers 63.79 square feet. Use this figure for estimating and cost-per-square-foot comparisons — cutting yield depends on your layout and is not a published figure.
Can this panel be used for cabinet interiors as well as exteriors?
Yes, and the A/A construction makes it especially efficient for that use. The interior and exterior of a cabinet box built from this panel are the same finished surface, so no additional liner, backer, or paint step is needed on the inside face.
One Panel, No Hidden Faces
When the design calls for a surface that works from every angle, the Saviola GSP42 Coral Sand A/A panel in the Laguna finish removes the compromise. Both faces are done, the core holds hardware cleanly, and matching edgebanding closes the cut edge — so the panel ships finished and the shop focuses on cutting and joining, not on covering up the back.
