Artwood Edgebanding for a Clean Finish on Canyon Coco Panels
This is the factory-matched ABS edgebanding for Saviola Canyon Coco (GSD19) panels in the Artwood finish. The 65mm wide strip is sized to trim flush on thicker stock and panel builds, and the 54-foot short roll covers a focused job without committing a shop to a full production spool.
Key Features
- Color-matched to GSD19 Canyon Coco Artwood so face and edge read as one continuous surface.
- ABS polymer construction is chlorine-free, making it the right call where PVC is restricted by specification.
- 65mm width provides enough overhang to trim flush on thicker panels and laminated builds.
- 54-foot roll is a short-run format suited to single projects and small-shop inventories.
- 1mm thickness delivers a substantial edge that hides the core cleanly and holds up to daily contact.
- Artwood finish carries the same textured wood-character surface that defines this decor across the Saviola collection.
Where This Banding Fits the Job
Canyon Coco in the Artwood finish reads as a warm, textured wood tone with the kind of depth that shows up well on cabinet faces, closet interiors, and commercial millwork. When a cut edge is left unfinished, that substrate core breaks the illusion entirely. This edgebanding closes the edge so the panel reads as a solid component from any angle. The 65mm width is particularly useful when the panel has been laminated, doubled up for a thicker door build, or paired with a solid wood edge detail that needs a wider band to bridge the transition cleanly.
The 54-foot roll is sized for a single cabinet run or a batch of doors rather than a high-volume production line. Shops running Canyon Coco on a recurring basis will want to assess the full production roll, but for a one-off kitchen or a refresh of a few closet panels, the short roll avoids tying up capital in footage that sits on the shelf.
ABS Material in Practice
ABS edgebanding is the standard for European decorative panel programs, and it is what the Saviola collection is designed around. Unlike PVC, ABS is chlorine-free, which clears specifications that restrict halogenated materials in commercial or healthcare interiors. The material is dimensionally stable enough that the color and texture match holds across temperature changes that would cause a lesser banding to shift or gap at the joint. At 1mm, the strip has enough body to absorb minor edge contact without telegraphing through to the face.
Who Reaches for This Roll
Cabinet shops finishing a Canyon Coco Artwood project are the direct audience, but this roll also serves designers and contractors who need to touch up or extend a Saviola installation without sourcing a third-party near-match. The 65mm width adds range for shops working with non-standard panel thicknesses or stacked constructions. For a fabricator running the Saviola collection consistently, keeping this roll stocked alongside the panel means no delay when an unedged part comes off the saw.
Is this the correct banding to match Saviola Canyon Coco TFL panels?
Yes. This edgebanding is produced for the GSD19 Canyon Coco color in the Artwood finish, the same decor used on Saviola thermally fused laminate panels. Order this roll when the panel is from the Saviola collection in that color and finish.
What panel thickness does 65mm banding suit?
The 65mm width is wider than the 23mm and 43mm rolls in this collection, making it the right choice when panels are doubled, laminated, or built up beyond standard 19mm thickness. It trims flush on thicker builds where narrower banding would leave the core exposed.
Why does it matter that this banding is ABS rather than PVC?
ABS is chlorine-free. Some commercial and institutional specifications, particularly in healthcare and education, restrict PVC by name. ABS clears those specs while delivering the same edge performance. If the specification is silent on the material, either works, but ABS is the Saviola program's standard.
Can I use this banding with a standard hot-melt edgebander?
ABS banding runs on the same hot-melt equipment used for PVC. No adhesive or equipment change is required for shops already running a standard edgebander.
A Complete Edge, Without the Search
Sourcing a true color match for an edging strip is the step that stalls more cabinet jobs than it should. This roll is the direct match for Canyon Coco Artwood, sized for the job at hand, so the edge closes cleanly and the project moves forward.
