Wide-Width Coverage For A Warm Wood Tone
This ABS edgebanding in GSD19 Canyon Coco closes the cut edges of Saviola TFL panels in an Artwood finish, bringing a warm, tactile wood character to the edge without a visible seam. The 65 mm width handles thicker panel stacks, double-layer builds, and post-formed edges that narrower banding cannot cover cleanly, all on a single 328-foot production roll.
Key Features
- Color-matched to GSD19 Canyon Coco in the Saviola Artwood finish family, so the edge reads as a continuation of the panel face.
- 65 mm wide, providing enough material to trim flush on thick panels, double-panel builds, and lipped edges.
- 1 mm ABS construction is chlorine-free and dimensionally stable for consistent color and gloss matching.
- 328-foot production roll suits volume runs without mid-job splicing or roll changes.
- Artwood finish delivers a textured, wood-pore surface feel that complements the Saviola panel face under both hand and raking light.
Where The Wide Format Makes The Difference
Most edgebanding work lands on 19 mm or 18 mm panels where a 23 mm band is the standard choice. The 65 mm width is selected when the job moves beyond a single panel thickness. Furniture with laminated door blanks, panels glued up for added rigidity, shelving with a built-up front edge, or commercial display fixtures with a thick slab profile all produce an exposed edge that a narrow roll cannot cover in a single pass. At 65 mm, this roll finishes those edges completely and still trims flush with room to spare on both faces. Canyon Coco's warm brown tone and Artwood texture also work well on open shelf ends and visible cabinet sides where the edge is as much a design element as the face.
ABS Material And Artwood Finish
ABS banding is extruded from acrylonitrile butadiene styrene, a chlorine-free polymer. That matters on commercial and institutional jobs where specifications restrict PVC, and it keeps the banding on the correct side of green-building material requirements without any substitution paperwork. The 1 mm thickness gives the edge enough body to take a clean flush-trim pass and resist incidental impact once installed. The Artwood finish on this roll is produced to match the same finish family on the Saviola panel, so the texture at the edge aligns with the texture on the face rather than presenting a smooth band against a pored surface.
The Right Roll For Production Cabinet Shops
A 328-foot roll is a production quantity. Small shops running a one-off job may find it more than they need, but for a cabinet shop routing Saviola panels in Canyon Coco through an edgebander on a regular basis, having a full roll on hand eliminates the short-roll risk of running out mid-run. The 65 mm width also simplifies inventory: one roll covers every panel thickness and double-layer build in the shop without stocking a second, narrower roll alongside it. This edgebanding is the right choice for shops that have already committed to the GSD19 Canyon Coco color for case goods, door blanks, or commercial millwork and want the edge to match the panel without color-matching guesswork.
Is this edgebanding pre-glued, or does it require a separate adhesive?
This roll is not pre-glued. It is applied with an edgebander that uses a glue pot or hot-melt cartridge, the same setup used for standard production ABS banding.
Will the 65 mm width work on a standard 19 mm panel?
Yes. The 65 mm band trims down to any panel thickness below it. On a 19 mm panel it leaves significant overhang on both faces, which a flush-trim bit or scraper removes cleanly. The wider roll just means a longer trim pass, not a compatibility issue.
Why is GSD19 Canyon Coco listed as a discontinued color?
Canyon Coco is being discontinued by the manufacturer and is selling through existing inventory. It is fully orderable while stock lasts, making it suitable for a current project. For work that may require a reorder later, choose an active color to avoid a match problem down the road.
Does this roll come in a shorter length for smaller jobs?
The 65 mm width is available in the 328-foot production roll only. The shorter 54-foot roll is offered in the two narrower widths in the Saviola program, not in the 65 mm width.
Close Every Edge In The Same Color
When the panel face is Canyon Coco, the edge should be too. This roll finishes the job with a match the panel program was built to deliver, on a production quantity that keeps the shop moving without a reorder mid-run.
