Saviola ABS Edgebanding for Wide-Panel and Thick-Stock Edges
This 65mm ABS edgebanding in Coral Sand (GSP42) is produced to pair with SALT Saviola decorative panels, closing cut edges in the same Laguna finish decor so the panel reads as a single material from face to edge. At 54 feet per roll and 1 mm thick, it is sized for shops running a job lot of Coral Sand components without committing to a full production-length roll.
Key Features
- 65mm width provides ample overhang on thick stock and double-layer builds, trimming flush after application.
- 54-foot short roll is sized for single-job quantities, keeping leftover banding manageable in smaller shops.
- 1 mm ABS construction is chlorine-free, making it suitable for specifications that exclude PVC banding.
- Laguna finish match carries the exact Coral Sand decor from the panel face onto the edge in one continuous visual.
- Color-matched to GSP42 Coral Sand panels in the Saviola collection for a seamless appearance across components.
Where the 65mm Width Earns Its Keep
The 65mm width is the widest in the Saviola edgebanding program, and it is there for situations the 23mm and 43mm rolls cannot handle. Double-panel edge builds, thick shelving, and stacked substrate edges all benefit from the extra material that trims back cleanly rather than coming up short. Tall drawer box components, face-frame panel stacks, and any application where the visible edge exceeds a standard 19mm panel thickness are natural fits. The short roll format means a cabinet shop finishing a single Coral Sand kitchen does not have to buy 328 feet of one color to complete the job.
ABS Material and the Laguna Finish
ABS is extruded without chlorine, which separates it from PVC banding on projects where the specification names material type. The 1 mm thickness is substantial enough to survive the edgebanding machine and light handling damage without telegraphing the substrate through the face. The Laguna finish on this roll is produced against the same color reference as the Coral Sand panel face, so grain pattern, tone, and texture read consistently when the edge and face meet. Coral Sand carries a warm, light tone that works in both contemporary and transitional cabinet settings, and the Laguna finish gives it a structured surface character that holds up under normal interior use.
The Right Roll for Single-Job Quantities
Cabinet shops and finish carpenters specifying Coral Sand into a defined scope benefit most from this format. A kitchen with upper and lower cabinets, a closet system, or a run of built-ins will consume a meaningful amount of 65mm banding on panel stacks and thick components, and the 54-foot roll is sized to cover that scope without excess. Designers and contractors sourcing for a single install can order with confidence that the color match is factory-produced, not a third-party approximation. Homeowners finishing a renovation with Saviola panels on hand will find the short roll the practical choice over a production-length coil.
Does this banding come pre-glued, or does it require a glue pot?
This roll is supplied without pre-applied adhesive, so it is intended for use with a glue-pot edgebander or hot-melt application equipment rather than an iron-on process.
Why would I choose 65mm over the 43mm width for the same panel?
The 65mm width is the right choice when the edge exceeds standard 19mm panel thickness, such as on double-panel builds, thick solid shelves, or stacked substrate constructions. On a single standard panel, 43mm is sufficient and wastes less material after trimming.
Is 54 feet enough for a full kitchen?
For 65mm banding specifically, which is typically reserved for thicker components rather than every edge, 54 feet covers most single-job scopes. If the job is large or requires 65mm banding on every component, consider ordering multiple rolls or checking whether a longer roll is available.
What panels does this banding match?
This banding is color-matched to Coral Sand (GSP42) panels in the SALT Saviola collection. Verify the color code on your panel order before purchasing to confirm the match.
A Clean Edge on Every Coral Sand Component
Factory-matched ABS banding in Coral Sand means the edge never reads as an afterthought. Cut, band, and trim in a single pass and move on — the color and finish are already right.
