Wide-Format ABS Edgebanding Built for Thick Stock and Full-Sheet Runs
This Saviola ABS edgebanding in Coral Sand (GSP42) is the 65mm wide, 1 mm thick option sized for thicker panels, post-formed components, and any edge application where a narrower tape leaves too little overhang to trim cleanly. The Laguna finish matches the corresponding Saviola decorative panel in the same color, so the edge closes out flush with the face in tone and texture. Supplied on a 328-foot production roll suited to shop or project volume.
Key Features
- 65mm width provides generous overhang on panels up to approximately 19 mm thick, leaving enough material to trim both faces cleanly.
- ABS construction is chlorine-free, passing specifications that exclude PVC edgebanding from commercial or institutional interiors.
- Laguna finish match aligns gloss and texture with the Saviola Coral Sand panel face so the edge reads as a continuous surface.
- 1 mm thickness is the standard for production edgebanders and delivers a durable, impact-resistant edge profile.
- 328-foot roll supports a high run volume without a mid-job changeover on a single color.
- Coral Sand (GSP42) color is a warm neutral decor from the Saviola collection, suited to both contemporary and transitional casework palettes.
Where This Edgebanding Earns Its Place on the Run
The 65mm width is the working choice when narrower tape is not the right tool. Thicker substrates, stacked or laminated panels, and post-formed profiles all benefit from the extra material, because the wider strip tolerates variation in edge squareness and still trims flush without exposing core. On a busy production line running Saviola Coral Sand panels, keeping one matched roll loaded rather than switching between color options cuts changeover and eliminates color-mismatch risk on visible edges. The 328-foot roll length supports those runs without stopping to reload.
Material and Finish Integrity
ABS polymer is extruded, not laminated, so the color and texture run through the strip rather than sitting on a carrier that can delaminate. That construction also means the edgebanding is chlorine-free by material, not by treatment, which holds its compliance status across the product's life. The Laguna finish on this strip is produced to match the Saviola panel program, so the color code and the finish designation together define the right tape for the job. Using a mismatched roll, even in a similar neutral, is visible at a joint under normal light.
The Right Fit by Application and Shop Type
Cabinet shops running the Saviola collection in Coral Sand are the direct audience. The wide format suits furniture-grade casework, retail fixture work, and commercial interiors where a thick-edge aesthetic is part of the design language. Smaller one-off shops will use the 328-foot roll over a longer horizon, but the color-matched quality holds regardless of how long the roll sits. Designers specifying a warm sand neutral for a project that requires chlorine-free materials will find both the color match and the ABS material working together here.
Frequently Asked Questions
Does this banding come pre-glued?
No. This is unglued banding intended for application with a hot-melt edgebander. It is not an iron-on strip.
What panel thickness does 65mm banding typically serve?
The 65mm width works on panels up to roughly 50 mm, with trimming taking the overhang down to flush. It is the standard choice where 23mm or 43mm banding would leave too little material at the trim pass.
Why does ABS matter on a commercial specification?
Some institutional and green-building specifications exclude PVC materials. ABS is chlorine-free by composition, so it satisfies those requirements without a substitution process.
Is this the only width available for Coral Sand GSP42?
Matching edgebanding for the Saviola collection is available in additional widths. Select the width that matches your panel thickness and edge profile requirement.
How does the Laguna finish affect color matching?
Laguna is the named finish for this decor in the Saviola program. Ordering by finish name alongside the color code GSP42 confirms the tape shares the same texture and sheen as the panel face, which is what makes the edge disappear at the joint.
Coral Sand Edge, Closed Out Right
A matched edge in the right width and material turns a cut panel into a finished component — and this roll is sized for the jobs where that last step has to hold up to scrutiny.
