Chandler Finish Edgebanding for Rift-Grain Cabinet Work
This 23 mm ABS edgebanding in the Saviola Prague Rift color (GSAV2) is the factory-matched companion strip for Saviola TFL panels carrying the Chandler finish. At 1 mm thick and 328 feet per roll, it covers the cut edges of Prague Rift casework so face and edge read as one continuous surface.
Key Features
- Factory-matched color — produced to pair with GSAV2 Prague Rift Saviola panels, so the decor and texture carry across the edge without a visible seam.
- Chandler finish surface — the same emboss and sheen as the panel face, keeping texture consistent where face meets edge.
- ABS polymer construction — chlorine-free, dimensionally stable, and compatible with specifications that prohibit PVC.
- 1 mm thickness — the standard profile for a flush machine-applied edge on 19 mm panel stock.
- 23 mm width — sized to overhang a 19 mm panel on both faces for a clean trim-flush result.
- 328-foot production roll — enough footage for a full cabinet run without mid-job splicing.
Where This Edgebanding Works
Prague Rift reads as a straight, linear wood grain — the kind of clean, architectural pattern that suits contemporary kitchen cabinets, built-in wardrobes, and commercial millwork where the design calls for restraint. The Chandler finish adds surface character that holds up under task lighting without the depth variation of a more rustic wood decor. This banding is the right call whenever Prague Rift panels form the carcass or door front and the edge needs to disappear rather than announce itself. It runs on any standard edge banding machine and trims flush to the panel face on both sides.
Material and Construction
ABS is the preferred banding polymer for European decorative panel programs, and this roll is no exception. The chlorine-free formulation clears specifications that rule out PVC — useful on commercial and institutional jobs where finish material submittals get scrutinized. The 1 mm profile is thick enough to protect a routed or sawn edge from daily contact while remaining thin enough that the finished edge reads as a clean face rather than a separate component. Color and texture are matched at the Saviola factory to the GSAV2 decor and Chandler finish, so the match is exact rather than approximate.
Who Orders This Roll
Cabinet shops running Prague Rift panels through a production edgebander reach for this roll to keep the job moving without sourcing a third-party color match. Residential millworkers specifying contemporary kitchen or wardrobe interiors will find the straight rift-grain pattern versatile across a wide range of door styles. Commercial finish carpenters working on office built-ins or retail fixture work benefit from the ABS construction when a PVC-free submittal is required. The 328-foot roll suits any shop cutting more than a few sheets — smaller runs are covered by the wider widths in shorter lengths, but the 23 mm standard width ships only in this full-production roll.
Does this banding match the Saviola Prague Rift TFL panels exactly?
Yes. The GSAV2 edgebanding is produced by SALT International as the factory match for Prague Rift Saviola panels. The decor and the Chandler finish emboss are sourced from the same program, so edge and face align without color drift or texture mismatch.
Is ABS edgebanding a drop-in replacement for PVC on an existing machine?
In most cases, yes. ABS runs on the same hot-melt edgebanders as PVC and trims with standard tooling. Adhesive temperature settings may need a slight adjustment depending on the machine and the glue pot in use — check the machine manufacturer's recommendation for ABS before the first run.
What panel thickness is the 23 mm width designed for?
The 23 mm width is the standard match for 19 mm panel stock. It overhangs both faces by roughly 2 mm on each side, leaving enough material for a clean flush trim. On a 16 mm or 18 mm panel it still trims flush, though the overhang is slightly greater.
Is matching HPL available for Prague Rift to carry the color onto a countertop?
Saviola HPL is available in matching colors and ships in two sheet sizes. Whether GSAV2 Prague Rift is among the stocked HPL colors should be confirmed at the time of order, as HPL availability varies by color within the collection.
A Clean Edge from the Same Source as the Panel
When the panel and the banding come from the same factory program, the edge stops being a detail to manage and starts being a finish that takes care of itself — Prague Rift face to Prague Rift edge, Chandler texture matched through.
