P-System CNC Groove Cutter, DTK 52mm Z3
Item # CS132143
•Mfr # 132143
$406.09
/Each
Min Order: 1
Qty mult. by: 1
Product Details
The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine. The use on a CNC machine requires the diamond-tipped P-System cutter with tool opening 30mm. To cut P-System grooves in the work piece edge using an angle aggregate, a cutter arbour is used the dimensions of which vary according to the unit and machine type. The 6mm carbide drill is used for angles of up to 30 degrees without deflecting when it hits the work piece surface. This is necessary for miter joints and other angled connections since the tool openings are at the same angle as the cut, thus presenting a risk of drill slippage.
Features:
• Tools for serial production of the P-System connectors on a CNC machine
• The form-locking P-System anchorage enables a powerful installation in the work piece without the need for tools within seconds
Features:
• Tools for serial production of the P-System connectors on a CNC machine
• The form-locking P-System anchorage enables a powerful installation in the work piece without the need for tools within seconds
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Product Type | |
| Application | |
| Arbor | |
| Blade Diameter | |
| Blade Type | Groove Cutter |
| Blade Material | |
| Kerf | |
| Number of Teeth | |
| Bore Diameter | |
| Hook Angle | |
| Tooth Grind Type |
Item # CS132143
•Mfr # 132143
$406.09
/Each
Min Order: 1
Qty mult. by: 1
Product Details
The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine. The use on a CNC machine requires the diamond-tipped P-System cutter with tool opening 30mm. To cut P-System grooves in the work piece edge using an angle aggregate, a cutter arbour is used the dimensions of which vary according to the unit and machine type. The 6mm carbide drill is used for angles of up to 30 degrees without deflecting when it hits the work piece surface. This is necessary for miter joints and other angled connections since the tool openings are at the same angle as the cut, thus presenting a risk of drill slippage.
Features:
• Tools for serial production of the P-System connectors on a CNC machine
• The form-locking P-System anchorage enables a powerful installation in the work piece without the need for tools within seconds
Features:
• Tools for serial production of the P-System connectors on a CNC machine
• The form-locking P-System anchorage enables a powerful installation in the work piece without the need for tools within seconds
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Product Type | |
| Application | |
| Arbor | |
| Blade Diameter | |
| Blade Type | Groove Cutter |
| Blade Material | |
| Kerf | |
| Number of Teeth | |
| Bore Diameter | |
| Hook Angle | |
| Tooth Grind Type |