ABS Edgebanding for a Clean Finish on Boheme Panels
This 23 mm ABS edgebanding in GSAL2 Boheme is the color-matched companion to the Saviola collection's Boheme panels, sized to trim flush on a 19 mm board and supplied on a 328 foot production roll. The Loom finish coordinates with the panel face so the cut edge disappears against the surface rather than reading as a seam.
Key Features
- Color-matched to GSAL2 Boheme — produced in the same decor as the Saviola panel so face and edge read as one surface.
- ABS polymer construction — chlorine-free extrusion that clears specifications restricting PVC and holds color and dimension accurately through edgebander heat cycles.
- 23 mm width — trims flush on a 19 mm panel with enough overhang to clean up both faces cleanly.
- 1 mm thickness — standard production thickness that feeds through an automated edgebander without adjustment for most machine setups.
- 328 foot roll — production-length supply suited to a cabinet shop running multiple sheets in one color.
- Loom finish — a textured surface character that matches the Boheme panel face and keeps the edge consistent under close inspection.
Where This Edgebanding Fits the Work
Boheme is a wood-look decor, and the strength of that look depends on the edge reading as part of the face. A mismatched band breaks the illusion immediately — a well-matched one disappears. This roll is made specifically for Saviola Boheme panels, so the color, texture, and finish family align without requiring a close-enough approximation from a third-party source. It suits cabinet boxes, shelf carcasses, and door frames where the cut edge is visible and the standard for finish is the same as the face. A 328 foot roll is sized for shops cutting multiple sheets in the same color rather than a single piece, so it makes sense when Boheme is a recurring color in the shop's work rather than a one-off specification.
ABS Material and What It Means for the Job
ABS banding is chlorine-free, which matters on projects where the specification sheet rules out PVC. It also holds dimensional stability well through edgebander temperature cycles, which reduces the risk of a band walking or telegraphing a glue line after application. The 1 mm thickness is a common production standard that feeds through automated equipment consistently. Because this is the vendor's own matching program, the color is formulated against the same print file as the panel face, not matched by eye from a sample — that consistency is what makes the edge read correctly across a full run of cut parts.
Who Reaches for This Roll
Cabinet shops running Saviola Boheme as a specified or stocked color will find a 328 foot roll sized to a realistic production quantity. Closet manufacturers cutting full-height sides and shelves in a wood-look decor need the edge to finish at the same standard as the face — this roll handles that without sourcing a substitute. Designers specifying Saviola Boheme for a kitchen or built-in project can confirm the matching band exists in the vendor's program rather than leaving it to a shop to improvise. The ABS construction is also the right answer when a green building specification or a sustainability-conscious client asks what the banding is made from.
Does this edgebanding require a special glue or edgebander setting?
This roll is unglued ABS banding intended for use with a standard hot-melt edgebander and a compatible EVA or PUR adhesive. No special machine settings are required beyond what the machine manufacturer recommends for 1 mm ABS at 23 mm width. Confirm your glue pot temperature with your adhesive supplier if you are switching from PVC to ABS for the first time.
Why choose ABS over PVC banding for this color?
ABS is chlorine-free, so it meets specifications that exclude PVC on environmental grounds. The material also holds color fidelity and dimensional stability through edgebander heat well, which helps the match to the panel face stay consistent across a long run. Where the specification is silent on banding material, either works — but ABS is the right default when there is any chance of a restricted-materials clause.
Can I use this banding on panels from a different collection?
The color is matched to GSAL2 Boheme in the Saviola collection. Other collections may carry a decor with a similar appearance, but the print file and finish are specific to Saviola. Using it on a panel from a different collection is a judgment call based on a sample comparison rather than a vendor-confirmed match.
Is a shorter roll available in this color?
Saviola edgebanding in 23 mm ships on a 328 foot production roll. A shorter roll option is not available in this width for this collection. If the job calls for less footage, the remainder stores on the roll for the next cut.
A Consistent Edge from the Same Source as the Panel
Matching the edge to the face is the last step that makes a panel component read as a finished part. GSAL2 Boheme ABS edgebanding comes from the same vendor program as the panel, so the color alignment is built in rather than approximated.
