Wider Coverage, Clean Finish: 43mm Boheme Edgebanding for Thicker Stock
This is the 43mm roll of Saviola ABS edgebanding in color GSAL2 Boheme with a Loom finish, matched to the Saviola decorative panel program. At 43mm wide and 1mm thick, the strip is sized to cover thicker panels and give the trimmer enough material to clean up flush on both faces. The roll ships at 328 feet, so a production run does not stop to reload.
Key Features
- 43mm width provides the overhang needed to trim flush on panels up to roughly 38mm thick, including double-panel and thick-slab builds.
- 1mm ABS construction is chlorine-free, making it the right choice where PVC is restricted by spec or by preference.
- Loom finish texture aligns with the Saviola panel face so edge and face read as a continuous surface after trimming.
- GSAL2 Boheme color match is the vendor-published companion to Saviola panels in the same decor, not a close-approximation substitute.
- 328-foot production roll supports uninterrupted runs on an automatic edgebander without a mid-job changeover.
Where the 43mm Width Earns Its Place
Standard 23mm banding covers a 19mm panel with room to spare, but once the design calls for a thicker slab door, a doubled substrate, or a stacked top, the narrow strip does not give the trimmer enough to work with. The 43mm roll solves that cleanly: it bridges the extra thickness and still trims flush without a second pass. It is also the width to reach for on a 25mm or 28mm panel where the job spec calls for a finished edge rather than a raw core exposure. Cabinet shops running contemporary thick-frame door fronts will find the 43mm roll does work the 23mm cannot.
ABS Construction and the Loom Surface
ABS polymer is dimensionally stable and bonds reliably with standard hot-melt adhesives, which keeps the glue line tight even on a long horizontal run. Because it is chlorine-free it clears PVC-restricted specifications common in healthcare, educational, and LEED-influenced commercial work. The Loom finish is a textured surface in the Saviola program, and this banding carries the same texture as the corresponding panel face, so the edge does not contrast visually once the overhang is trimmed away. Color and texture both come from the vendor's own matching program, not from an aftermarket attempt to approximate the decor.
Who Orders This Roll
Cabinet shops producing thick slab fronts, furniture makers working with stacked or doubled substrates, and millwork houses edgebanding commercial panels in a Boheme-specified project are the natural buyers here. The 328-foot roll is sized for production: a single roll runs a meaningful quantity of parts before it needs to be changed, which keeps the edgebander moving. Designers and specifiers who have called out GSAL2 Boheme across a commercial interior will want to confirm this is the matching program roll before sourcing a generic substitute.
Will this banding work on a 19mm panel, or is 43mm only for thicker stock?
It applies fine to a 19mm panel — the extra width just means more to trim off. Most shops use 23mm for 19mm panels because there is less waste, but 43mm works on any thickness it physically covers.
Is this roll pre-glued, or does it require a separate adhesive?
This roll is not pre-glued. It is intended for use with a hot-melt adhesive system on an automatic edgebander or a hand-fed machine with a glue pot.
Does the Loom texture on the banding match the Saviola panel face exactly?
Yes. This is the vendor's published matching edgebanding for the Saviola collection in GSAL2 Boheme with the Loom finish. The texture and color are sourced from the same program as the panel, so the edge reads consistently after trimming.
Can this banding be used on curved work?
At 1mm thick, ABS banding has moderate flexibility. Tight inside curves may require scoring or heat softening. For radius work, confirm the bend radius against the banding's flexibility before committing to a full run.
One Roll, One Color, No Substitutions
When the panels are already cut to Boheme and the edge has to match, this is the roll that closes the job correctly. The 43mm width handles the thickness range a 23mm strip cannot, and the 328-foot length keeps production moving from the first part to the last.
