Wide-Format ABS Edgebanding for Thick Panels and Tall-Door Builds
This is the Saviola collection ABS edgebanding in color GSAL2 Boheme, 65 mm wide, supplied on a 54-foot roll at 1 mm thick with a Loom finish. The wider format is cut for 19 mm panels with room to spare on both faces, and the shorter roll suits single-job quantities without committing the shop to footage it does not need.
Key Features
- 65 mm width covers thick substrates and leaves trim margin on both faces for a flush, clean result.
- 1 mm ABS construction is chlorine-free, so it clears project specifications that exclude PVC banding materials.
- 54-foot roll is sized for single-job or small-run use without the waste of a full production-length coil.
- Loom finish delivers a woven-textile surface character that coordinates closely with the GSAL2 Boheme panel decor.
- Matching Saviola collection color keeps face and edge reading as one continuous surface after trimming.
Where This Roll Fits in the Cut List
The 65 mm width is the widest format in the Saviola edgebanding range. It belongs on any panel edge where the substrate runs at 19 mm or thicker, on stacked assemblies where two boards meet at a shared edge, or on door components that will be profiled before banding so additional material is needed for the profile pass. It also works on a 16 mm or 18 mm panel when the shop prefers maximum trim margin, particularly on runs where a slightly off-square edge needs more surface to clean up against. The 54-foot roll is the practical answer for a single project or for a shop finishing a specific job lot in Boheme before returning to a production color.
Material and Surface Character
ABS polymer is the material of choice where formaldehyde-sensitive or halogen-restricted specifications are in play. Unlike PVC banding, ABS contains no chlorine, which is increasingly a stated requirement on commercial and healthcare interiors. The 1 mm thickness gives the edge enough body to take a slight radius at the corner without feathering, while still trimming cleanly on a standard edgebander or a hand scraper. The Loom finish is a textured surface that mirrors the woven character of the GSAL2 Boheme decor, so the edge reads as part of the panel rather than a separate applied element. Color accuracy is controlled through the Saviola manufacturing program, keeping the banding matched to panels produced under the same color code.
The Shops That Order This Width
Cabinet makers building tall door fronts, full-height closet panels, or thick-core furniture components are the primary buyers of 65 mm banding. It is also the width that small production shops reach for when a job spec calls for a profiled or shaped edge, because the extra material survives a router pass. Designers specifying Saviola panels in Boheme for a hospitality or commercial interior will find the 54-foot roll easy to include as a line item per cabinet run. For a shop that does not want to open a 328-foot production roll on a one-off color, this format keeps the job clean and the offcut manageable.
Can I apply this banding with a hand iron rather than an edgebander?
This roll does not carry a factory-applied hot-melt adhesive, so hand-iron application is not the intended method. Run it through an edgebander with a glue pot or use a contact-cement application for site work. Pre-glued rolls are a separate product type.
Does this banding match the A/A Saviola panels in GSAL2 Boheme?
Yes. The Saviola edgebanding program produces banding in the same color codes as the panel collection, so GSAL2 banding is the manufacturer's match for GSAL2 Boheme panels. Order the panel and banding under the same color code to keep the match consistent.
Why is a 54-foot roll offered alongside the longer production roll?
The 54-foot format exists for jobs that do not consume a full production-length coil. A shop running a single kitchen or a small commercial fixture in one color can complete the job without leftover footage taking up rack space. The two wider widths in this range — 43 mm and 65 mm — are the ones available in the shorter roll.
What panel thickness is 65 mm banding designed for?
The 65 mm width is intended for panels at 19 mm and above, where it provides adequate overhang on both faces to trim flush cleanly. It can also be used on thinner panels when a profiled edge requires additional banding material, or when the shop simply prefers a wider trim margin.
The Right Banding Closes the Job
Matching edge to face is the last detail that makes a panel assembly read as a finished component. The GSAL2 Boheme banding in 65 mm closes that detail on thick panels and shaped edges where narrower rolls fall short, in a short-run format sized for the job at hand.
