328-Foot ABS Edgebanding For Closing SM'art Torino Panels With a Clean, Consistent Edge
This roll delivers factory-matched edgebanding in SM'art color SMIT03 Torino, sized to pair with 19 mm decorative panels on cabinet boxes, shelving, and casework components. At 23 mm wide and 1 mm thick, the strip trims flush against a standard panel face and leaves no visible core on the finished edge. The Italia finish aligns with the SM'art collection's surface character so the edge and the face read as one continuous surface rather than two separate materials.
Key Features
- ABS polymer construction is chlorine-free, clearing specifications that exclude PVC on commercial and institutional work.
- 23 mm width provides enough overhang to trim cleanly flush on a 19 mm panel with material to spare on both faces.
- 1 mm thickness delivers a solid, durable edge that resists chipping through normal cabinet use.
- 328-foot production roll supports continuous runs on an edgebander without frequent reel changes.
- Italia finish matches the SM'art SMIT03 Torino decor so edge and face surface character align without visible contrast.
- Color code SMIT03 is the vendor-defined identifier for Torino within the SM'art collection, keeping ordering precise across cuts and reorders.
Where This Edgebanding Earns Its Place on the Job
A 328-foot roll is the right format for shops running Torino panels through a production edgebander. Cabinet runs, closet systems, and commercial millwork components all generate linear footage quickly, and a full production roll means fewer changeovers per shift. The roll also covers the range of parts a typical project generates: drawer box faces, shelf edges, partition edges, and door blanks — without the shop running short partway through a batch. For a one-off piece or a repair, a shorter roll would serve; for anything running through a machine in volume, this length keeps the line moving.
Material and Finish Details
ABS edgebanding has replaced PVC as the preferred polymer for European decorative panel programs because it is chlorine-free and holds color and gloss matching more consistently across a wide range of finishes. The Torino color in the SM'art collection carries the Italia finish — the same surface texture and sheen the panel face presents — so the transition at the edge is seamless rather than approximate. At 1 mm, the strip is stiff enough to process through standard edgebanding equipment and durable enough to survive the contact a cabinet edge takes in daily use.
Who Specifies This Roll and Why
Cabinet shops specifying SM'art panels for kitchen, bath, or commercial interiors are the primary buyers. Any shop using SMIT03 Torino panels will need the corresponding banding to complete the component — a cut panel edge without matching banding is an unfinished part, not a finished one. Interior designers and millwork contractors specifying SM'art for commercial work also reach for this roll when the panel and its matching components ship together. The 328-foot format suits a shop that processes panels in volume and wants a single roll to carry through an entire project or production run without sourcing a second one mid-job.
Does this edgebanding require a special adhesive or machine setup?
ABS edgebanding runs on standard hot-melt edgebanding equipment. No special adhesive is required beyond what an edgebander already uses for ABS stock. Confirm your machine's temperature settings for 1 mm ABS if you are switching from PVC, since the two polymers have slightly different processing windows.
Is this roll pre-glued for iron-on application?
No. This is an unglued production roll intended for machine application with a hot-melt edgebander. For iron-on or hand application on a small job or repair, a pre-glued roll would be the right format.
Can this banding be used with SM'art panels in other colors?
This roll is color-matched to SMIT03 Torino specifically. Using it with a different SM'art color will not produce a matched edge. Each SM'art color has its own matching edgebanding roll identified by color code.
Does SM'art Torino have a matching high pressure laminate available?
SM'art HPL is available in the SM'art collection at 60 inches by 120 inches. Confirm with your sales contact whether SMIT03 Torino is among the colors offered in the HPL program for your specific project.
The Right Edgebanding Makes the Panel Complete
Matching the edge to the face is the final step that turns a cut panel into a finished component. This SM'art Torino roll in the Italia finish closes that gap cleanly, delivering a consistent surface from face to edge across every part in the run.
