ABS Edgebanding For Closing the Cut Edge in Firenze
This SM'art ABS edgebanding in color SMIT06 Firenze with the Italia finish is the factory-matched edge solution for SM'art decorative panels in the same color. A single 328-foot roll keeps a production run supplied without mid-job reorders, and the 1 mm ABS construction delivers the chlorine-free profile that closed-specification commercial and residential cabinet work demands.
Key Features
- Factory color match to SMIT06 Firenze — face and edge read as a continuous surface when trimmed flush.
- ABS polymer construction — chlorine-free material clears specifications that exclude PVC edgebanding.
- 23 mm width — sized to overhang a 19 mm panel face on both sides for a clean trim-flush result.
- 1 mm thickness — compatible with standard edgebander settings used for medium-density decorative panels.
- 328-foot production roll — enough footage to run a full cabinet job without splicing rolls mid-sequence.
- Italia finish — matches the surface character of SM'art panels carrying the Italia finish family.
Where This Edgebanding Fits the Work
Residential and commercial cabinet shops running SM'art panels in Firenze use this roll to finish every cut edge — shelf returns, cabinet box sides, door edges, and face-frame reveals where the core would otherwise show. The 328-foot roll is the right unit for a shop processing multiple sheets in a color: enough linear footage to run a full batch without stopping, and none of the waste that comes from short rolls on long jobs. It also suits millwork operations that run this color on wall panels and store fixture components where edge finish is part of the specification.
Material and Finish Construction
ABS — acrylonitrile butadiene styrene — is the standard edgebanding polymer in European-sourced panel programs, and it is the material SALT International specifies for the SM'art collection. Its chlorine-free formulation is what separates it from PVC banding: commercial specifications for healthcare, education, and public occupancy interiors increasingly name ABS by material, not just by appearance. At 1 mm, the tape is thick enough to survive machining without telegraphing through to the face, and thin enough to maintain a tight glue line on a standard edgebander. The Italia finish on the banding is matched to the same finish family as the SM'art Firenze panel, so the texture and sheen at the edge are consistent with the face under raking light.
Who Specifies This Roll
Cabinet fabricators running SM'art panels as a primary board program are the core buyer for this SKU. Designers who specify SM'art panels by color in project documents also call out the matching banding to keep the submittal complete. The 328-foot roll format suits shops that move through a color regularly rather than occasionally — a single-run shop finishing one kitchen in Firenze will use a portion of the roll, while a production shop running repeat orders in the same color will cycle through rolls steadily. For a shop carrying SM'art as a stocking color, keeping a roll of the matching banding on the shelf is standard practice.
Frequently Asked Questions
Is this banding PVC-free?
Yes. ABS edgebanding is chlorine-free, making it suitable for specifications that explicitly exclude PVC. The two materials look similar in a roll but have different chemical profiles — confirm your spec requires ABS before substituting.
Does the Italia finish on the banding match the Italia finish on the SM'art panel?
Yes. The Italia finish on this roll is coordinated to the SM'art panel program. The banding and the panel share the same finish family, so sheen and texture align at the joint.
Will 23 mm width work on a panel thicker than 19 mm?
The 23 mm width is designed for 19 mm panels and provides overhang on both faces for a trim-flush result. On thicker substrates — 22 mm or 25 mm — a wider band is the right choice to maintain adequate overhang.
Can this roll be applied with a hand iron rather than an edgebander?
This roll is not pre-glued, so it requires a glue pot or edgebander for application. Iron-on application is not suitable for this product.
The Right Edge for a Finished Panel
A panel specified by color deserves an edge that completes it. Matching ABS banding in SMIT06 Firenze keeps every cut edge consistent with the face — so the finished cabinet reads as one surface, not a panel with a visible seam where the work stopped.
