Italia Finish Depth and a Perfect Panel Match
This SM'art ABS edgebanding in Firenze (SMIT06) closes the cut edge of SM'art collection panels with the same Italia finish texture and tone that defines the face. At 43 mm wide and 1 mm thick on a 328-foot production roll, it is sized for shops running full cabinet runs where a short roll would mean mid-job reorders.
Key Features
- Matched to SM'art Firenze (SMIT06) — produced by SALT International to align with the panel face color and Italia finish texture.
- 43 mm width — trims flush on panel thicknesses up to approximately 38 mm, with enough overhang for a clean flush trim on both edges.
- 1 mm ABS thickness — provides solid edge protection without adding noticeable bulk at seams or miters.
- 328-foot production roll — the long-run format for edgebanders in continuous production environments.
- ABS polymer construction — chlorine-free, dimensionally stable, and color-consistent for specifications that exclude PVC.
- Italia finish surface — the SM'art collection's signature textured finish, carried from panel face to edge for a seamless visual result.
Where This Edgebanding Fits the Job
The 43 mm width handles the mid-range panel thicknesses common in European-style cabinet boxes and door components — thick enough to need more than a standard 23 mm band, narrow enough to trim without material waste on 19 mm and 25 mm stock. On a cabinet run built entirely from SM'art panels, it is the component that keeps the edge reading as part of the face rather than a seam. It is equally useful on exposed shelf ends, visible case sides, and door perimeters where the Italia finish needs to wrap the edge rather than stop at it.
ABS Construction and the Italia Finish
ABS edgebanding is the standard for European decorative panel programs because the polymer holds color and gloss tightly against the panel face across a full production run. It is chlorine-free, which clears it for specifications that restrict PVC, and its dimensional stability keeps the color match consistent from the beginning of the roll to the end. The Italia finish on this band is the same surface family as the SM'art panel program — a textured emboss that gives the Firenze decor its depth and tactile character. Where a plain or mismatched band would read as a visible border, the coordinated finish makes the edge disappear into the face.
Who Orders This Roll and Why
Cabinet shops running SM'art panels in volume are the primary buyer. The 328-foot roll suits a shop with an edgebander in regular production — it is not the format for a single-cabinet repair, but it is exactly right for a kitchen or closet program where running out mid-batch costs real time. Millwork operations specifying SM'art for commercial interiors, store fixtures, or hospitality casework will find the long roll aligns with the scale of those jobs. The ABS material also works for designers and architects writing specifications that exclude PVC, since ABS meets that restriction without requiring a material substitution on the order.
Does this edgebanding require a specific adhesive or machine setup?
ABS edgebanding runs on standard automatic edgebanders using EVA or PUR hot-melt adhesive. No special setup is required beyond confirming your machine's feed rollers and temperature settings are dialed for 1 mm ABS stock. Pre-glued iron-on formats are not available in this width.
Can this band be used on panels from other collections or brands?
It can be applied to any panel edge mechanically, but the Italia finish and Firenze color are specific to the SM'art collection. On a non-SM'art panel the color may read as close but the finish texture will not coordinate the way it does with a matched SM'art face.
Is matching edgebanding available in other widths for the same Firenze color?
Yes. The SM'art collection offers matching ABS edgebanding in 23 mm and 65 mm widths as well, with 328-foot rolls in all three widths. The two wider widths also come in 54-foot rolls for smaller runs.
What does the Italia finish look like and feel like?
Italia is a textured emboss in the SM'art finish family — it carries a surface relief that gives the Firenze decor depth and a tactile quality under the hand. It is not a smooth or high-gloss face; it reads as a finished, textured surface that coordinates with the corresponding panel decor.
The Edge That Completes the Panel
Matching edgebanding in the right width and finish is what keeps a panel job from looking assembled rather than designed. This roll delivers the Firenze color and Italia finish in a production-ready format, so the edge reads as part of the work from the first cabinet to the last.
