ABS Edgebanding For Panels That Need a Finished Edge in Cannella
This SM'art ABS edgebanding in Cannella (SMIN04) is the matching edge solution for SM'art decorative panels in the same decor, supplied in a 43 mm wide, 328-foot production roll at 1 mm thick. The Intagli finish carries the same textured surface character as the SM'art panel face, so the edge closes out a cut panel without a visible material shift.
Key Features
- SM'art collection match: Color-coded SMIN04 Cannella coordinates directly with SM'art TFL panels in the same decor for a seamless face-to-edge appearance.
- Intagli finish: The textured surface profile aligns with the SM'art panel emboss so the edge reads as part of the same component.
- 43 mm width: Sized to overhang a standard 19 mm panel on both faces, leaving enough material to trim flush cleanly in one pass.
- 1 mm ABS construction: Chlorine-free ABS polymer holds a consistent thickness, bonds reliably on automatic edgebanders, and clears specifications that restrict PVC.
- 328-foot production roll: Full-length roll suited to volume edgebanding runs without mid-job splices.
Where This Edgebanding Fits the Job
Cannella is a warm mid-tone brown decor — the kind of color that appears on cabinet box sides, shelf edges, and door perimeters in kitchen, bath, and closet casework. When SM'art panels in SMIN04 are cut to component parts, every exposed edge is a raw core line until the banding goes on. This roll closes those edges so the finished cabinet reads as a single material rather than a faced board. It works on automatic edgebanders with a standard hot-melt glue system and is equally manageable on a manual feed machine for smaller shops running lower volume.
Material and Construction
ABS is the edgebanding polymer of choice where PVC is restricted by project specification or by shop preference. It is chlorine-free, dimensionally stable across the temperature range of a typical shop environment, and consistent enough in color and sheen to hold a tight match to the panel face. At 1 mm the strip is thick enough to protect an edge from routine contact without building out the component dimension. The Intagli texture is pressed into the face of the banding to replicate the relief of the SM'art panel surface, which matters most under raking light where a flat banding face would break the texture line visibly.
Who Orders This Roll
Cabinet shops running SM'art panels in Cannella are the primary buyers — they need the matched roll on hand before the first sheet goes to the saw. A 328-foot roll covers a substantial production run without inventory gaps. Designers and specifiers who have called out SM'art SMIN04 panels in a project use this roll to complete the edge specification rather than sourcing an approximate match from a third-party banding program. Contractors finishing site-built casework in the same decor can treat the roll as the straightforward edge-finish component the job requires.
Does this banding come in other widths for thinner panels?
SM'art edgebanding is available in 23 mm and 65 mm widths as well, in 328-foot rolls. The 23 mm width suits thinner panel stock, and the 65 mm width works on thicker components or where a wide edge band is part of the design. The two wider widths also come in a 54-foot short roll if the job does not justify a full production roll.
Can I use this banding on panels from a different collection?
The match is developed for SM'art panels in SMIN04 Cannella. Using it on a panel from another collection or another color will likely produce a visible difference in tone or texture at the edge. For a reliable result, match banding to the panel by collection and color code.
Is this roll pre-glued or unglued?
This is unglued production banding intended for use on an automatic or semi-automatic edgebander with a hot-melt glue system. It is not an iron-on strip.
What does the Intagli finish look like?
Intagli is a textured finish in the SM'art collection with a defined surface relief. It is designed to align visually and tactilely with the emboss on the corresponding SM'art panel face. Requesting a sample before committing to a full production run is the best way to confirm the edge-to-face match under the lighting conditions of the finished install.
The Right Edge for the Panel You Already Specified
Matching banding from the same collection and color code is the one edge detail that holds a casework job together at every cut line — this roll delivers that for SM'art Cannella without the guesswork of a third-party color match.
