Intagli Texture and a Warm Spice Tone, Ready to Band
This SM'art ABS edgebanding in Cannella (SMIN04) carries the Intagli finish family's textured surface onto cut panel edges, closing the core with a color and grain character that reads as part of the panel face. At 43 mm wide and 1 mm thick, the roll is sized for the 54-foot short-run format, giving smaller shops a practical quantity for a single project without committing to a full production roll.
Key Features
- ABS polymer construction is chlorine-free, clearing specifications that restrict PVC in commercial and institutional casework.
- 43 mm edgeband width provides enough overhang to trim flush on standard panel thicknesses with material to spare on both faces.
- 1 mm thickness delivers a solid, chip-resistant edge that seats cleanly in an automated edgebander or with a hand applicator.
- 54-foot roll is the short-run format intended for jobs where a 328-foot production roll would leave most of the material unused.
- Intagli finish matches the texture family of SM'art panels in this decor, so face and edge share the same surface character.
- Cannella color (SMIN04) brings a warm, spice-toned wood decor that pairs naturally with contemporary and transitional casework palettes.
Where This Banding Fits the Work
Cannella reads as a warm mid-tone with enough depth to anchor a two-tone layout or stand on its own in a monochromatic cabinet run. The Intagli texture gives the edge a defined surface relief that holds up under raking light, which matters on tall door fronts and drawer faces where the edge is seen at eye level. This banding is the finishing detail that keeps a SM'art Cannella panel from exposing a raw particleboard core at every visible cut edge, and the 43 mm width handles panel thicknesses commonly used in cabinet box and door construction without a separate wide-banding setup.
The 54-foot roll suits a bath vanity, a small closet build, or a kitchen island where a single color runs through a contained set of parts. It also works as a backup roll for shops that stock the 328-foot format but need an in-hand supply for a repair or a last-minute change order.
ABS Material and Surface Character
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a polymer valued for dimensional stability and precise color reproduction across a roll. The chlorine-free composition is relevant wherever a project specification, a green building program, or an institutional procurement standard rules PVC out. The Intagli finish on this banding is coordinated to the surface texture of SM'art panels in the same decor, so the edge does not read as a flat strip against a structured face. The 1 mm body provides enough rigidity for automated application and enough flexibility for radius work on tight corner profiles.
Who This Roll Is For
Custom cabinet shops specifying SM'art panels in Cannella will find this the direct color match for closing exposed edges cleanly. Designers detailing a warm wood interior in the SM'art line can specify this banding alongside the panel for consistent documentation across a submittal. Contractors finishing on-site repairs or replacements in an existing Cannella installation benefit from the 54-foot format, which ships without the volume commitment of a production roll. Any shop that needs ABS rather than PVC for compliance reasons and is working in this color family has the material choice built into the product.
Is this banding the right width for 19 mm panels?
Yes. The 43 mm width provides enough overhang above and below a 19 mm panel face to trim cleanly on both sides with a standard flush-trim setup. It also works on 18 mm and 16 mm stock for the same reason.
Does the Intagli texture on the banding match the panel face exactly?
The banding is produced in the same Intagli finish family as the SM'art Cannella panels, so the texture character is coordinated. There will always be some visible difference between a panel face and an applied edge strip, but the surface reads as part of the same material rather than a flat contrast band.
Can I use this banding with a hand iron instead of an edgebander?
This roll is not pre-glued. It requires a glue pot or hot-melt adhesive system for application. For hand application without an edgebander, confirm you have a suitable adhesive before ordering.
Is a longer roll available in this color and width?
SM'art edgebanding in the wider widths, including 43 mm, is also available in a 328-foot production roll for shops running higher volume. The 54-foot roll is the short-run format for this width.
The Right Edge for a Finished Result
A well-matched edge strip is what keeps a decorative panel looking like a deliberate design choice at every visible cut. This Cannella banding in the Intagli finish closes that detail in the color and texture the panel already establishes, so the job reads finished from every angle.
