SM'art ABS Edgebanding For Wide-Panel and Tall-Door Edges
This 65 mm ABS edgebanding in color SMIT04 Milano, Italia finish, is sized for the thicker and taller panel edges found in contemporary casework and floor-to-ceiling cabinet runs. It is the matching banding produced by SALT International for the SM'art collection, so face and edge read as a single uninterrupted surface once the strip is trimmed flush.
Key Features
- 65 mm width covers thick panel edges and built-up substrates without requiring a second pass or a wider backer strip.
- 1 mm ABS construction delivers a chlorine-free edge that clears specifications where PVC is restricted.
- SMIT04 Milano, Italia finish is the vendor-matched decor for this SM'art color, so the banding aligns in tone and texture with the panel face.
- 328-foot production roll supplies a multi-cabinet run or a full shop order from one spool.
- SM'art collection match means the banding is sourced from the same program as the panel, not approximated from a third-party stock.
Where 65 mm Banding Earns Its Place
Most edgebanding in a cabinet shop runs at 23 mm, sized for a standard 19 mm panel. The 65 mm width enters the picture on thicker substrates, built-up door edges, stacked shelving with a face-laminated nosing, and tall slab doors where the edge itself is a visual element. On a floor-to-ceiling run, the edge faces forward at eye level — a narrower strip that falls short of both faces looks undersized and draws the eye. The 65 mm banding gives the trimmer enough material to flush both faces cleanly and still leave margin. It is also the right call when a shop bands thick components such as countertop build-ups or integrated island panels where the nominal edge depth exceeds what a 23 mm or 43 mm strip can cover.
Material and Finish
ABS is the preferred banding polymer for European decorative panel programs. It is extruded without chlorine, so it does not raise a flag on specifications that exclude PVC, and it holds color and gloss consistency tightly enough for precise decor matching. The Italia finish family in the SM'art collection pairs a defined surface texture with the Milano decor, keeping the edge character consistent with the panel face under raking light. At 1 mm, the banding bonds well through a standard hot-melt edgebander and trims to a tight radius on a scraper without chipping or lifting at the corner.
Who This Roll Is For
Cabinet shops running SM'art panels in the Milano color are the primary buyer: matching banding from the collection program eliminates the color-matching guesswork that comes with sourcing a close-enough third-party strip. The 328-foot roll suits production volumes, covering multiple cabinets or a full kitchen run before the spool needs changing. Millwork operations building tall architectural pieces, integrated panels, or thick slab components will also find the 65 mm width more practical than cutting down narrower stock. Designers specifying SM'art for a project can confirm the banding by color code alongside the panel order so the components arrive together.
Does this banding require a special adhesive or machine setup?
Standard hot-melt edgebanding adhesive and a conventional automated edgebander handle 1 mm ABS without modification. Pre-glued variants are not part of this program — use your shop's normal glue-pot setup.
Is matching HPL available for SM'art Milano to carry the color onto a countertop?
Yes. SM'art is one of the SALT collections that does have a matching high-pressure laminate sheet available, unlike SALT 5 and PRO PET. Confirm the specific HPL listing for SMIT04 Milano when placing the panel order so the countertop and the casework share the same color program.
Why is the 65 mm width offered alongside 23 mm and 43 mm in the same color?
Width is chosen against the panel edge depth, not the panel face. A 23 mm strip trims flush on a 19 mm panel. The 65 mm strip covers thicker substrates, built-up door profiles, and laminated nosings where a narrower band would not reach both faces. Stocking the wider width means the same color can run through a project that mixes standard carcass panels and thicker components without a color break at the edge.
Is ABS banding compatible with the same glue line temperature as PVC?
ABS processes at temperatures comparable to PVC on most hot-melt edgebanders, though the optimal window varies by machine and adhesive. Check the edgebander manufacturer's recommendation for ABS — most modern machines handle both polymers on the same settings.
The Right Edge Closes the Detail
On a wide, visible edge, the banding is not background — it is part of the finished surface. Matched in color, texture, and program to the SM'art panel face, this 65 mm ABS roll lets the edge hold up to the same scrutiny as the face without a visible seam in the color story.
