328-Foot Roll Edgebanding for Wide-Panel and Full-Height Cabinet Work
This SM'art ABS edgebanding in color SMIT04 Milano with an Italia finish is the vendor-matched banding for SALT International's SM'art decorative panel collection, supplied in a 43 mm wide, 328-foot production roll. At 43 mm, it is sized for panel thicknesses that outrun a standard 23 mm band, including doubled panels, thick structural shelves, and stacked-edge details where a wider finished edge is part of the design.
Key Features
- 43 mm width covers thicker substrates and built-up edges that a 23 mm band cannot span cleanly.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and compatible with edgebander glue systems that exclude PVC.
- 328-foot production roll suits cabinet shops running volume in this color without mid-job roll changes.
- Italia finish matches the surface texture and sheen of the SM'art panel collection in this decor, so face and edge read as one surface.
- Vendor-matched color SMIT04 Milano is produced by SALT International to align with SM'art panels in the same decor — no approximate color matching required.
Where the 43 mm Width Earns Its Place
Most casework runs on 19 mm panels banded at 23 mm, and that combination covers a standard cabinet box efficiently. The 43 mm band exists for the jobs that fall outside that norm. A solid-look slab door built from two panels laminated face-to-face produces an edge close to 40 mm. A thick structural shelf specified for a library or commercial display run lands in the same range. Stacked-edge details on furniture and retail fixtures, where the visible edge is a design feature rather than an afterthought, also call for the wider band. In each of those scenarios, running a 23 mm strip and filling the remainder is a patch; running the 43 mm band from the start is the right answer.
ABS Material and Italia Finish
ABS edgebanding is chlorine-free, which matters when the project specification restricts PVC or when the shop prefers to standardize on a single banding material across green-certified work. It processes cleanly on standard edgebanding equipment and holds color and gloss consistency across a long run without the batch variation that can appear in lower-grade materials. The Italia finish is the texture and sheen designation SALT International uses across the SM'art collection — applying it to the banding keeps the edge consistent with the panel face under both direct and raking light, which is the detail that separates a finished piece from an assembled one.
Who Runs This Roll
The 328-foot roll is a production quantity. A small shop doing one or two accent pieces in Milano does not need this much banding, and there is no short roll in the 43 mm width. The customers who order this roll are cabinet shops running a program in SM'art Milano — closet and storage work, commercial casework, or furniture production where Milano is a house color and the 43 mm edge comes up regularly. It is also the right buy for a contractor stocking for a multi-unit or multi-room job where running out mid-install is not an option.
Frequently Asked Questions
Does the 43 mm width come in a shorter roll for smaller jobs?
No. In the SM'art collection, shorter 54-foot rolls are available only in the two wider widths — 43 mm and 65 mm are not offered in a short roll format. If the job calls for a small quantity in this width, plan for leftover stock or coordinate with a shop that already carries this color.
Is this the banding to order for SM'art panels in SMIT04 Milano?
Yes. Part number SMIT04.43MM is the vendor-matched ABS edgebanding SALT International produces for color SMIT04 Milano in the SM'art collection at this width. Order the 23 mm roll if your panels are standard 19 mm thickness and you do not have a stacked or built-up edge requirement.
Can this banding be applied with a standard edgebander?
ABS banding at 1 mm runs on the same edgebanding equipment used for PVC. No adhesive system changes are required, though confirming the machine's recommended glue temperature for ABS is good practice on the first run.
Is matching HPL available for SM'art in this color?
SM'art HPL is available in 60 inch by 120 inch sheets. If you need to carry the Milano color onto a countertop or a component the panel does not cover, matching HPL is the companion product to look for in the SM'art collection.
The Right Edge Closes the Job
A panel face that ends at an unmatched edge undermines every hour of work behind it. Vendor-matched banding in the correct width means the edge is finished, not corrected — and a 328-foot roll means the shop does not run short on a color that is not easy to substitute mid-project.
