Wide-Format ABS Edgebanding For Thick Panels and Visible Edges
This SM'art ABS edgebanding in color SMIN02 Zenzero is the 65 mm wide format, sized to cover thick panels and wide-edge applications where a narrower strip falls short. The Intagli finish carries the same textured surface character as the SM'art decorative panel collection, so a cut edge reads as a continuous surface rather than an afterthought. Sold as a 54-foot roll, it is the short-run option for jobs that do not justify a full 328-foot production roll.
Key Features
- 65 mm width handles thick substrates and wide-profile edges that a 23 mm or 43 mm band cannot reach.
- Intagli texture finish matches the surface character of SM'art panels in this decor for a seamless face-to-edge appearance.
- ABS construction is chlorine-free, making it compatible with specifications that restrict PVC edgebanding.
- 1 mm thickness applies cleanly on standard edgebanding equipment and trims flush with a single pass.
- 54-foot roll is the right quantity for single-job and small-run work without committing to a production-length coil.
- Color-matched to SMIN02 Zenzero from the SM'art collection, produced by SALT International to match the panel decor.
Where the 65 mm Width Earns Its Place
Most edgebanding jobs run on 23 mm band because most panels are 19 mm thick. The 65 mm format exists for the work that does not fit that pattern: thick composite doors, doubled-up substrate builds, stacked-panel countertop edges, and any panel assembly where the finished edge face exceeds what the narrower strips cover. It also suits wide furniture edges and display components where the band itself is a visible design element rather than a concealment strip. If your cut list includes edges thicker than 45 mm or wide faces that need a single unbroken strip, this is the width to specify.
Material and Finish
ABS is the edgebanding polymer of choice where PVC is restricted or where a cleaner environmental profile matters. It machines and trims the same way as PVC on standard equipment, holds color consistency well across a roll, and takes the fine detail of a textured finish like Intagli without surface variation. The Intagli finish on this roll is the same embossed texture profile used on SM'art decorative panels, which is what allows the edge to match the face without a visible gloss or texture break. At 1 mm thick, the band sits solidly on the substrate edge and leaves enough overhang on both faces for a clean flush trim.
Who Orders This Roll
Cabinet shops finishing a run of thick-panel components in Zenzero reach for this roll when the job is too small to warrant a 328-foot coil but too specific to substitute a close color. Designers who have specified SM'art panels in SMIN02 Zenzero will call it out by color code to maintain the match across every exposed edge. Contractors completing a fixture installation with a handful of field cuts use the 54-foot roll to cover the work without leftover inventory. Wherever the SM'art Zenzero panel appears and a cut edge needs to match, this is the edgebanding that closes it.
Is this the only roll length available for the 65 mm width?
In the SM'art collection, the two wider widths — 43 mm and 65 mm — are available in both the 54-foot short roll and the 328-foot production roll. If your volume justifies the longer coil, the production roll is also stocked for this color and width.
Does SM'art edgebanding require a dedicated machine or can it be applied by hand?
This roll is unglued banding for machine application with a glue pot edgebander. It is not a pre-glued iron-on product. For field repairs or very small jobs without an edgebander, a contact adhesive application is possible but a machine bond gives the cleaner result on a finished cabinet.
Will this banding match SM'art panels from a different production run?
SALT International produces the edgebanding and the panel from the same decor program, so SMIN02 Zenzero banding is designed to match SMIN02 Zenzero panels. Natural batch variation exists in any production run, but matching within the same color code is far tighter than sourcing a third-party approximate. Order a sample if you are joining new banding to older panel stock.
Can this banding be used on panels from other collections in the SALT line?
The Zenzero decor is part of the SM'art collection. If another SALT collection carries the same color code and the same Intagli finish, the banding will read as a match. Where the finish or decor differs across collections, the edge will not be a visual match even if the color name is similar.
The Right Edge Finish for a Complete Panel Job
A panel job is only as finished as its edges. This SM'art ABS edgebanding in SMIN02 Zenzero brings the Intagli texture and color match to every cut edge, so the surface reads consistently from face to edge without a break in pattern, tone, or texture.
