328-Foot ABS Edgebanding Roll For Thick Panels and Exposed Edges in Zenzero
This SM'art ABS edgebanding in color SMIN02 Zenzero is the wide-format companion to SM'art decorative panels, sized at 65 mm to cover thicker stock and leave ample overhang for a clean trim on both faces. Sold on a 328-foot production roll, it is sized for the cabinet shop running multiple jobs or anyone who needs a serious quantity of one color on hand.
Key Features
- 65 mm width gives generous overhang on panels up to roughly 50 mm thick, simplifying flush-trim on both faces in a single pass.
- 328-foot roll covers a substantial run of casework without a mid-job splice or a rush reorder.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and suited to shops or specifications that exclude PVC banding.
- Intagli finish carries the SM'art collection's embossed surface texture onto the edge, so face and edge read as one continuous surface.
- Color SMIN02 Zenzero is a stocked SM'art color with a dedicated matching edgebanding produced by SALT International to coordinate precisely with the panel decor.
Where Wide-Format Edgebanding Does Its Best Work
At 65 mm, this roll is the right choice when the panel edge is too tall for a 23 mm or 43 mm strip to cover cleanly. Thick carcass panels, stacked shelves, and furniture-grade components with a visible edge profile all benefit from a wider band that leaves enough material to trim without risking a short edge. It also suits shops running an automatic edgebander with a wide-capacity glue unit, where a narrow strip requires a tooling change.
Cabinet runs that stay in one color long enough to use a 328-foot roll see the most value here. Kitchens, closet systems, and commercial millwork jobs where Zenzero runs throughout a large install are natural fits. The roll size also makes sense for a shop keeping a color in long-term stock rather than ordering per project.
ABS Construction and Intagli Surface Detail
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a chlorine-free polymer that meets specifications where PVC is excluded. It takes adhesive cleanly from a hot-melt glue pot or a standard edgebander, bonds without bridging on a straight run, and trims to a sharp edge with a flush-trim bit or scraper. The 1 mm thickness adds enough body to protect the core at a corner without building visible bulk against the face.
The Intagli finish is not a printed pattern applied over a plain strip. It is the SM'art collection's structured surface texture pressed into the banding face, matching the emboss of the panel itself. When the banded edge meets the face at a square corner, the texture continues without a visible step. That detail is what separates a dedicated matching band from a close-color substitute.
The Right Buyer for This Roll
Professional cabinet shops specifying SM'art panels into a project will find this roll straightforward: one color, one texture, produced to coordinate with the panels already in the order. The wide width and full-length roll both point toward production volume rather than occasional use. Designers specifying Zenzero into a commercial interior can call out SMIN02 with confidence that the edge will match the face across every component. Smaller shops running a one-time Zenzero job may want to confirm the quantity needed before committing to a full roll.
Does the 65 mm width work on a standard edgebander?
Most production edgebanders handle 65 mm banding without modification, but check the maximum tape width in your machine's specification. Some compact or entry-level units are rated to 45 or 50 mm and require a glue-unit adjustment or a wider-capacity model for 65 mm stock.
Is this the same Zenzero color as the SM'art panel panels?
Yes. SMIN02 Zenzero is the dedicated matching edgebanding for the SM'art Zenzero panel decor. The color code and texture are produced by SALT International to coordinate with the SM'art panel of the same name.
Why choose ABS over PVC for this application?
ABS is chlorine-free, which clears it for specifications that restrict PVC. The two materials apply and trim similarly on most edgebanders, so the switch does not change the shop process. If the specification or the end customer does not restrict PVC, either works; if it does, ABS is the answer.
Is matching HPL available in Zenzero to carry the color onto countertops?
Matching HPL is not part of the SM'art collection. The program includes matching ABS edgebanding for the panel colors, but no matching high-pressure laminate sheet. Plan countertops and other HPL applications with a coordinating color from another source.
One Color, Edge to Face, Across the Whole Job
When a panel color runs through an entire install, the edge treatment either holds the look together or gives it away. This 65 mm roll in SMIN02 Zenzero with the Intagli texture is the piece that closes the gap between the face you specified and the edge that everyone touches.
