328-Foot ABS Edgebanding For Calacatta Panel Runs
The Saviola GSA83 Calacatta ABS edgebanding is the factory-matched edge solution for panels in the Saviola collection carrying the Calacatta decor. At 23 mm wide, 1 mm thick, and supplied on a 328-foot production roll, this banding is built for shops running volume work where a clean, consistent edge matters as much as the face.
Key Features
- Saviola color match: Produced by SALT International to coordinate with the GSA83 Calacatta decor in the Saviola TFL panel collection.
- ABS construction: Chlorine-free acrylonitrile butadiene styrene extrusion — no PVC, which satisfies specifications that restrict halogenated materials.
- 23 mm width: Sized to overlap a 19 mm panel on both faces, leaving enough material to trim flush cleanly on an edgebander.
- 1 mm thickness: Standard production thickness that feeds reliably through automatic edgebanders and holds a sharp, durable edge under normal cabinet use.
- Blunt finish: Ends are cut square, ready for automated equipment without additional prep.
- 328-foot roll: Production-length roll suited to batch runs and continuous work without mid-job roll changes.
Where This Banding Fits in a Cabinet Project
The GSA83 Calacatta decor reads as a bright white ground with soft grey veining — the kind of surface that shows an unfinished core edge immediately. Matching banding closes that gap so the panel reads as a solid component from every angle. This matters most on visible parts: door and drawer fronts, open shelf edges, cabinet box sides, and island end panels. Anywhere a raw edge lands in sightlines, the matching band keeps the Calacatta story consistent from face to edge.
The 328-foot roll is the right buy when a project runs multiple sheets of the same color or when a shop keeps the Calacatta decor in regular rotation. A roll this length covers a full kitchen's worth of parts without a reorder interrupting the run.
ABS Material and Why It Matters for Specification Work
ABS is extruded without chlorine, which puts it on the approved list for projects where PVC is restricted by the specification, the green building program, or the client's own material standards. The polymer also holds color and gloss stability well under shop lighting and handling, so the white ground of a Calacatta decor stays consistent across a roll rather than shifting batch to batch. The 1 mm wall gives the edge real impact resistance while staying thin enough to disappear visually against a flat panel face.
Who Reaches For This Roll
Cabinet shops running Saviola TFL panels keep the matching banding on hand so every Calacatta job can be edged without a special order delay. Commercial millwork operations appreciate the ABS construction when a specification calls out PVC-free materials. Small shops doing a single kitchen specify the 328-foot roll knowing the leftover carries cleanly into the next job using the same color. The Calacatta decor also moves through renovation and refacing work, where the banding is applied to existing substrate or new face frames alongside the panel.
Is this banding pre-glued, or does it require a glue pot?
This roll is not pre-glued. It is designed for use with an automatic edgebander that applies hot-melt adhesive during the feed. It will not bond reliably with a household iron.
Will 23 mm cover the edge of a 19 mm panel?
Yes. The 23 mm width overhangs both faces of a 19 mm panel, giving the edgebander enough material to trim flush on the top and bottom in a single pass.
Does this banding also match Saviola panels in other thicknesses, such as 8 mm?
The color match is to the GSA83 Calacatta decor in the Saviola collection regardless of panel thickness. The 23 mm width is wide enough to cover standard casework thicknesses. If you are working with a non-standard thickness, confirm the overhang before ordering.
Is there a shorter roll available for smaller jobs?
The 328-foot roll is the stocked length for this color and width combination. A short roll is not available in the 23 mm width for this Saviola color.
The Right Edge for a Color Worth Showing
Calacatta is a finish people choose because it reads beautifully across a large surface — matching banding makes sure the edge never interrupts that read, and a 328-foot production roll makes sure the shop never has to stop mid-run to source more.
