A Gran Tour Finish Panel Built for Both-Face Visibility
The Saviola A/A decorative panel in Vogue brings a Gran Tour finish to both faces of an 83-5/16 inch by 110-1/4 inch sheet, making it the right call for any component where the back is as visible as the front. At 8 mm thick, it fits door constructions, lightweight partitions, and open shelf work where a standard 19 mm board would add unnecessary weight.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade pair: Both faces carry the same Gran Tour decorative surface, so either side can show without a second operation.
- Gran Tour finish: A deeply structured wood-texture emboss that reads as tactile grain under raking light and direct touch.
- 8 mm thickness: Sized for door panels, lightweight cabinet backs, and frame-and-panel work where a full-thickness board is unnecessary.
- 83-5/16 inch by 110-1/4 inch sheet: A large-format sheet at 63.79 square feet, dimensioned to nest tall door and partition parts efficiently.
- CARB2 compliant particleboard core: The core meets CARB2 formaldehyde emission requirements and holds fasteners cleanly for secondary operations.
- Matching ABS edgebanding available: Color-matched banding in the Vogue decor closes cut edges so face and edge read as one surface.
Where an 8 mm Two-Faced Panel Earns Its Place
An A/A panel at 8 mm solves a specific layout problem: the component will be seen from both sides, and the full weight of a thicker board is not justified. Tall room dividers, glass-door cabinet backs, open bookcase shelving, and inset door panels are all natural fits. In a frameless cabinet run, an 8 mm back panel keeps the box light without sacrificing a finished interior. For a shop cutting long door stiles or rail-and-panel assemblies from a single sheet, the 83-5/16 by 110-1/4 inch size yields parts that a standard 49 by 97 sheet cannot produce in one piece.
Gran Tour Construction on a Particleboard Core
The Vogue decor uses a wood-pattern print under the Gran Tour emboss, a texture deep enough to register under the hand and directional enough to catch light along the grain line. Because the surface is thermally fused directly to the particleboard, there is no adhesive layer at the face and no glue line to telegraph at the edge. The CARB2 compliant hardwood particleboard core is consistent in density across the sheet, which matters when the panel runs through a beam saw or a CNC router and both faces need to machine cleanly. At 8 mm, the panel is lighter per square foot than a standard 19 mm sheet of the same construction, a practical consideration when handling large sheets solo or fitting them into an overhead carcase.
Specified by Designers, Useful for Cabinet Shops
Designers specifying furniture-grade casework or feature wall panels reach for the Saviola collection when a consistent, tactile wood look is required across a project and natural veneer variation is not acceptable. Cabinet shops use it on door panel inserts, shelf decks, and lightweight carcase backs where both faces must match. The large-format sheet is equally useful for a contractor cutting one large component as for a production shop nesting multiple parts. Matching ABS edgebanding in the Vogue decor is available separately to finish every cut edge in the same color and texture.
What does A/A mean on a Saviola panel?
Both faces carry the same Vogue Gran Tour decorative surface. There is no backer or secondary face — the panel looks the same from either side, which is what the A/A grade pair indicates in this collection.
Why is 8 mm the right thickness for door panel inserts?
A door frame routed for a floating panel insert typically runs a groove sized for a thinner board. At 8 mm the panel seats in a standard groove, stays light enough not to stress the door frame over time, and still presents a fully finished face on both sides.
Does matching edgebanding exist for the Vogue color?
Yes. Matching ABS edgebanding is available in the Vogue decor and is sold separately. It is the right choice for closing cut edges on shelves, partitions, or door components cut from this panel.
How does the Gran Tour finish differ from a standard matte surface?
Gran Tour is a structured texture with pronounced wood-pore relief — the emboss is deep enough to feel, not just see. A standard matte finish has a light tooth but no directional grain structure. Gran Tour is suited to applications where a tactile, wood-read surface is part of the design intent.
Can this panel be used for exterior applications?
This panel is for dry indoor use. The particleboard core is not rated for exterior or high-moisture environments. For work near sinks or in humid enclosures, check whether a water-resistant core option suits the job.
One Sheet, Both Faces Finished
When the design calls for a panel that looks right from every angle, the Saviola A/A in Vogue delivers a consistent Gran Tour surface on both faces at a thickness that keeps the component light and the cut list honest.
