An A/A Decorative Panel For Open Casework and Visible Interiors
The Saviola Benevento panel is a thermally fused laminate (TFL) decorative panel finished on both faces, built for cabinet boxes, open shelving, and any component where the interior is as visible as the exterior. Color GSR95 Benevento in the Chandler finish brings a warm, textured surface character to both faces of the sheet, so the panel reads cleanly from every angle without a secondary finishing step.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 compliant — meets the California formaldehyde emission limits that commercial and residential specifications ask for.
- CARB2 hardwood particleboard core — the substrate the decor is fused to.
- A/An A/A construction means both faces carry the full decorative finish, making this panel suited for open boxes and room-divider casework where the back panel shows.
- Chandler finish delivers a textured surface character that adds tactile depth and works with the Benevento decor's warm tone.
- 8 mm thickness keeps the panel light enough for interior partitions and back panels while holding a clean machined edge.
- 83-5/16 inch by 110-1/4 inch sheet size is sized for tall cabinet runs and full-height closet components with workable offcuts.
- TFL construction fuses the decorative face directly to the core under heat and pressure, so there is no adhesive layer to open at the edge.
- Matching ABS edgebanding is available in the Benevento color, so cut edges close to the same decor without a visible seam.
Where This Panel Earns Its Place
An 8 mm A/A panel covers ground that a thicker slab cannot: back panels on wall cabinets, interior partitions in closet systems, and open-shelf carcasses where the viewer looks straight through from the front. Because the Chandler finish runs on both faces, a box built from this panel does not need a separate interior liner or a paint step on the back. It also works well for room dividers and display cases in retail or hospitality millwork, where the reverse face is a finished surface rather than a hidden substrate. At 83-5/16 by 110-1/4 inches, the sheet covers full-height interior panels in a single piece on most residential and light-commercial applications.
Surface, Core, and Long-Term Performance
TFL construction bonds the decorative paper to the board during manufacturing, creating a surface that does not peel or delaminate under normal interior conditions. The Chandler finish gives the Benevento decor a textured hand that holds up to light cleaning and everyday contact in a cabinet interior. At 8 mm the panel is a practical choice for back panels and interior dividers that need to be light without sacrificing a clean cut edge. Matching ABS edgebanding lets the shop close every exposed edge in the same decor, which is especially useful on an open shelf or a room divider where both the face and the edge land in the line of sight.
The Right Fit for This Panel
Cabinet shops building high-volume closet systems benefit most from the sheet's generous size and the A/A construction that eliminates face-selection decisions at the saw. Designers specifying open millwork for residential or commercial interiors get a finished surface on both faces without a custom paint or laminate step. Smaller custom shops cutting back panels and interior shelving from a single stocking sheet will find the 8 mm thickness matches common back-panel specifications and leaves the heavier stock for structural carcass work. This panel is for interior, dry applications only.
What does A/A mean on this panel?
A/A means both faces carry the same decorative finish to the same appearance standard. Either face can be the show surface, which is what makes this construction right for open boxes, room dividers, and any component visible from front and back.
Is matching edgebanding available for Benevento?
Yes. Matching ABS edgebanding is available for the Saviola collection in this color, so cut edges close to the same decor as the face. Confirm the width you need against your panel thickness and edge profile before ordering the roll.
Can this panel be used for cabinet doors?
At 8 mm this panel is sized for back panels, interior dividers, and shelving rather than structural door slab work. For full door fronts, a thicker panel in the same Benevento color is the better match.
Does the Saviola collection include matching high-pressure laminate?
Yes. The Saviola collection has matching HPL available, which lets you carry the same decor onto countertops and high-wear horizontal surfaces the panel itself does not cover. HPL ships in two sheet sizes, so confirm which fits your shop's capacity.
What applications is this panel not suited for?
This is an interior panel for dry environments. It is not rated for exterior use, direct water exposure, or wet-area installation.
Consistent Finish on Every Face That Shows
When the interior of a cabinet is as visible as its front, an A/A panel removes the workaround. Benevento in the Chandler finish covers both faces in a single sheet, so the shop cuts, edges, and assembles without stopping to plan which side faces out.
