Saviola TFL Panel For Open Casework and A/A Applications
The Saviola Benevento panel in the Chandler finish is an A/A-grade, A/A thermally fused laminate decorative panel, built for cabinet boxes, open shelving, room dividers, and any component where both faces are visible. The A/A grade pair means both faces carry the same decorative surface to the same appearance standard, so there is no hidden side and no need to track orientation through the shop.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- A/A grade pair: Both faces carry the full Benevento decor in the Chandler finish, so either face can show in the finished piece.
- 19 mm panel thickness: Sized for standard confirmat and hardware mounting without additional build-up.
- 83-5/16 inch x 110-1/4 inch sheet: A fractional sheet size engineered to nest full-height casework parts with a usable offcut.
- Thermally fused laminate surface: The decorative face is fused directly to the core under heat and pressure, so there is no separate glue line to open at the edge.
- CARB2 compliant hardwood particleboard core: Holds a machine-driven fastener cleanly and stays flat across a wide run.
- Matching ABS edgebanding available: Coordinate the cut edge to the face for a finished, single-surface appearance.
Where the Benevento Panel Earns Its Place
Open shelving is the most demanding test for a decorative panel because sightlines run underneath, behind, and alongside every shelf. A panel whose back face is a plain balancing backer fails immediately in that context. The Benevento A/A panel passes because both faces are built to the same appearance standard. Floating shelves, open-back bookcases, freestanding retail fixtures, room dividers, and island cabinet boxes with exposed end panels are all natural fits. It also simplifies shop workflow: no face-marking, no stacking orientation to maintain, and no rework when a part is flipped.
The Chandler finish gives Benevento its specific surface character. Pair the panel with matching ABS edgebanding in the same decor to close cut edges so the panel reads as a solid component rather than a faced board.
Construction and Surface Detail
TFL fuses the decorative paper directly to the substrate in a single press cycle, producing a face that is part of the board rather than a layer bonded on top. On an A/A panel this happens on both faces simultaneously, which is why the face-to-face flatness is inherently balanced. The hardwood particleboard core is CARB2 compliant and holds a confirmat, dowel, or cam lock well across the full sheet area. At 19 mm the panel pairs with 23 mm edgebanding on a square edge, with enough overhang on both faces to trim flush cleanly.
Who Orders This Panel
Cabinet shops running open-box or frameless construction reach for A/A panels as a default for cabinet sides and backs that will be seen from the room. Millwork fabricators use them for partition walls and display cases where the viewer can walk around the piece. Designers specifying floating shelving or an open wardrobe system need the confidence that both faces of every component are finished to the same standard. The 83-5/16 inch by 110-1/4 inch sheet size supports tall layouts, and the Benevento decor in the Chandler finish fits a wide range of contemporary interior palettes without demanding a matched-wood program.
Frequently Asked Questions
What does the A/A designation mean on this panel?
A/A means both faces carry the Benevento decor to the same appearance grade. Unlike an A/B panel, there is no secondary or looser-standard back face. Either face can be the show face.
Is matching edgebanding available for Benevento in the Chandler finish?
Yes. Saviola matching ABS edgebanding is available for this color. ABS is chlorine-free and passes specifications that restrict PVC.
Does the sheet size work for full-height cabinet sides?
The 110-1/4 inch length supports full-height runs in standard ceiling-height installations, and the fractional dimensions are chosen to minimize waste when nesting tall parts.
Is matching HPL available for Saviola panels?
Yes, matching high-pressure laminate is available for Saviola colors and ships in 73 inch by 120 inch and 60 inch by 120 inch sheets. Check the Saviola HPL listings for Benevento availability in both sizes.
What core compliance documentation is available?
The hardwood particleboard core is CARB2 compliant. Verify the current documentation against your submittal requirements at the time of order.
A Panel That Works Finished Side Up — or Down
The Saviola Benevento A/A panel in the Chandler finish removes the orientation question from the shop floor and keeps the job moving when design calls for both faces to show.
