54-Foot ABS Edgebanding For Wide Panels and Tall Door Components
This SM'art collection ABS edgebanding in color SMIN04 Cannella delivers a factory-matched edge finish on the wider cuts a full panel run produces. At 65 mm, the strip is sized for thicker substrates and deeper shelving profiles, closing the core on components where a standard 23 mm band would fall short. The Intagli finish coordinates directly with SM'art decorative panels in this decor, so face and edge read as one continuous surface after trimming.
Key Features
- 65 mm width accommodates thicker substrates and deeper edge profiles that narrower banding cannot span.
- 54-foot short roll keeps a single-job or limited-run purchase practical without committing to production-length footage.
- 1 mm ABS construction is chlorine-free, dimensionally stable, and suited to specifications that restrict PVC.
- Intagli finish in Cannella is the vendor-matched decor for SM'art panels in this color, so the edge disappears against the face.
- Designed for edgebander application, the strip feeds consistently through automated equipment without the buildup issues of thicker tape.
Where the Wide Roll Earns Its Place
Most panel runs use 23 mm banding on standard 19 mm stock, but the work does not always stop there. A thicker laminated slab, a built-up countertop edge, a deep floating shelf, or a structural upright cut from doubled board all present an edge face that 23 mm tape cannot cover in a single pass. The 65 mm width was made for exactly those situations. It is also the right choice when a shop is cutting Pura Vita or other thicker panels in the SM'art color palette and wants a single matched band rather than a seamed edge. The 54-foot roll format keeps the purchase proportional to a project rather than a production run, which suits a custom shop finishing a one-off piece or a designer specifying a bespoke component in Cannella.
ABS Material and the Intagli Finish
ABS edgebanding is chlorine-free, which matters on any project where the specification calls out PVC restrictions, including healthcare environments and green building submittals. The polymer is dimensionally stable enough to hold color and gloss accuracy, which is why SALT International uses it across the SM'art matching program rather than PVC. The Intagli finish on this roll is a textured surface within the SM'art collection — its character is consistent with the panel face it was produced to match, so the transition from face to edge carries the same visual register. Trim flush, clean the joint, and the edge reads as part of the panel rather than an added strip.
The Right Fit for This Roll
Custom cabinet shops finishing a run in Cannella are the natural buyer here, particularly when the work includes components that are deeper or thicker than standard 19 mm carcass stock. Interior designers specifying SM'art panels for a commercial fit-out will find the 54-foot roll sized correctly for a moderate component count without leaving a large remainder. For a shop that machines wide shelving, library components, or commercial display fixtures in this decor, the 65 mm width removes the need to piece a seamed edge on anything short of a truly massive laminated profile.
What panel thickness does 65 mm banding suit?
The 65 mm width covers substrates well beyond the standard 19 mm, including doubled or laminated boards, built-up countertop profiles, and structural uprights. It trims flush on any edge narrower than 65 mm, so it works on thick stock where narrower widths leave core exposed.
Is this roll pre-glued or does it require a glue pot?
This roll is unglued and is intended for edgebander application with a hot-melt glue system. It is not iron-on banding.
Does SM'art edgebanding come in longer rolls for production work?
Yes. The 54-foot roll is the short format, suited to project or single-job quantities. The SM'art collection is also available in 328-foot production rolls in the same widths for higher-volume shops.
Why choose ABS over PVC edgebanding?
ABS is chlorine-free, which satisfies specifications that restrict halogenated materials. It also holds color and texture fidelity very well, which is why it is the material SALT uses for precision-matched banding in the SM'art program.
One Color, Carried All the Way to the Edge
Matching edgebanding is the detail that finishes a panel properly — and in Cannella Intagli, this 65 mm roll gives a wide-edge component the same surface continuity a standard cut gets from narrower tape. Order the roll sized to the job and let the SM'art color do the rest.
