ABS Edgebanding For Deep-Toned Ash Panel Edges
This 65 mm ABS edgebanding in Frassino Scuro (PVFS22) is the color-matched banding for the Pura Vita collection's dark ash decor, designed to close cut panel edges so the face and edge read as a single continuous surface. At 1 mm thick and 328 feet per roll, it is sized for production runs where a shop needs to work through a full job without changing out stock.
Key Features
- Matched to Pura Vita PVFS22 Frassino Scuro — color and texture coordinate directly with the dark ash panel decor from the same collection.
- ABS construction — chlorine-free polymer that meets specifications where PVC is restricted.
- 65 mm width — sized to overhang a thicker panel with enough material to trim flush on both faces.
- 1 mm thickness — machine-ready profile compatible with standard edgebanding equipment.
- 328-foot production roll — keeps a high-volume run going without mid-job roll changes.
Where This Banding Earns Its Place
Dark, open-pore wood decors are unforgiving at the edge. A bare or mismatched cut line breaks the illusion that the Frassino Scuro face is working hard to create. This banding is built to finish that edge cleanly, whether the application is cabinet carcasses, closet components, open shelving, or wall panels where the cut edge is visible from across the room. The 65 mm width gives a trimmer room to work, which matters on thicker panels and panels with a heavier face layer where the trim pass needs a margin.
Material and Construction
ABS differs from PVC at the specification level, not just the chemistry level. Many commercial projects, healthcare environments, and institutional interiors prohibit PVC edgebanding outright, and ABS clears those requirements by default. The polymer is dimensionally stable under standard shop conditions, holds color accurately across the roll, and bonds reliably through conventional hot-melt edgebanding machines. At 1 mm, the profile is thick enough to absorb minor edge irregularities without telegraphing them through the face and thin enough to disappear in the finished joint.
Who Specifies This Roll
Cabinet shops running the Pura Vita collection reach for this roll when Frassino Scuro panels are on the cut list. The 328-foot length suits commercial millwork operations, closet component manufacturers, and production cabinet shops where a shorter roll would interrupt the workflow. Designers specifying the dark ash decor into kitchens, built-ins, or retail fixtures can call this out by color code knowing the edge will match what the panel face delivers.
Is this banding compatible with standard automated edgebanders?
Yes. The 1 mm ABS profile runs on conventional hot-melt edgebanding machines without modification. Confirm your machine's glue pot temperature range against the adhesive spec on the roll packaging before the first run.
Does the 65 mm width work on panels thinner than typical cabinet carcass stock?
It does. The wider band gives you more overhang to trim, which is an advantage on thicker panels, but it applies cleanly to thinner stock as well. The trim pass simply removes more material, and the finished edge is the same.
Why specify ABS over PVC for this application?
ABS is chlorine-free, which satisfies specifications that exclude PVC on environmental or health grounds. For jobs in healthcare, institutional, or LEED-tracked commercial interiors, ABS is the call. For standard residential cabinet work either polymer performs, so the spec requirement is usually the deciding factor.
Can I use this banding with panels from other collections that carry a similar dark ash color?
This banding is produced to match the Pura Vita PVFS22 Frassino Scuro decor specifically. Color and texture are calibrated against that panel program. A visually similar decor from a different collection may not be a true match at close inspection, so order a sample before committing the job.
The Right Edge for a Demanding Decor
Frassino Scuro is a rich, dark ash decor that draws attention, and the edge is where that decor either holds together or falls apart. Matching ABS banding in the correct color and width means the finished panel looks complete from every angle, not just straight on.
