328-Foot ABS Edgebanding Roll For Matching Pura Vita Rovere Milano Panels
This is the manufacturer-matched ABS edgebanding for the Pura Vita collection's Rovere Milano decor, supplied in a 43 mm wide, 328-foot production roll at 1 mm thickness. It brings the Natural Milano Oak Soft Brushed finish off the panel face and onto the cut edge, so a finished component reads as a single continuous surface rather than a faced board with an exposed core.
Key Features
- Manufacturer-matched decor: Produced by SALT International specifically for the Pura Vita Rovere Milano color, so the face and edge share the same print and texture.
- Natural Milano Oak Soft Brushed finish: The soft brushing lifts the early grain slightly, adding tactile depth consistent with the panel's veneer-look surface character.
- 43 mm width: Sized to trim flush over the panel thickness with enough overhang on both faces to clean up cleanly on an edgebander.
- ABS polymer construction: Chlorine-free material clears specifications that restrict or exclude PVC edgebanding.
- 328-foot production roll: Full-length roll sized for shop edgebanders running continuous production, not hand-application jobs.
- 1 mm thickness: Standard machine-grade thickness for automated edgebanding equipment with a glue pot or pre-applied hot-melt system.
Where This Edgebanding Fits the Job
The 43 mm width is the right call for panel thicknesses in the mid-range — it gives the edgebander enough overhang to trim both faces and both long edges without going back for a second pass. A 328-foot roll suits shops running a full kitchen, a run of closets, or a commercial casework package: enough footage to finish a meaningful quantity of parts before a changeover, without the waste of loading a production roll for a one-cabinet repair. Cabinet doors, drawer fronts, shelf edges, and exposed box ends in the Rovere Milano decor all land in this roll's range.
Material and Finish
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a chlorine-free polymer. That distinction matters on commercial jobs where the specification document explicitly excludes PVC, and it is increasingly relevant on residential work where green building submittals are part of the close-out package. The banding is dimensionally stable across the temperature range of a typical shop environment, which helps color and gloss hold their match to the panel face after trimming. The Natural Milano Oak Soft Brushed finish uses a surface treatment that lifts the early grain just enough to read under a raking light, consistent with the Pura Vita panel program's character without crossing into the more pronounced texture of a wire-brushed surface.
Who Orders This Roll
Cabinet shops running Pura Vita panels in Rovere Milano are the primary buyer — the manufacturer match means no color-chasing between panel and banding order, and a 328-foot roll is the right purchase quantity when a production run spans multiple jobs. Millwork studios specifying the Pura Vita collection for commercial interiors will also use this roll where the ABS material clears a project specification that excludes PVC. A single-roll order covers enough linear footage that smaller shops should calculate their actual edge count before ordering — a short-run repair or sample job is better served by the collection's narrower width options, not a second production roll of this one.
Does this banding require a specific adhesive or edgebander setup?
ABS edgebanding at 1 mm thickness runs on standard automated edgebanders with a hot-melt glue system. No special adhesive is required beyond what a shop already uses for standard ABS stock. Pre-glued iron-on application is not the intended use for a 328-foot production roll.
Will this banding match if I order Pura Vita Rovere Milano panels at a later date?
The banding and the panel share the same color code and are produced together in the Pura Vita program, so re-orders match within normal production tolerances. As with any wood-look decor, it is good practice to band panels from the same production run when a tight visual match across a large surface is critical.
Is 43 mm the right width for a 19 mm panel?
Yes. A 43 mm band on a 19 mm panel leaves approximately 12 mm of overhang on each face, which is well within the trim range of any automated edgebander and gives a hand-trimmer enough material to work with cleanly.
Is there a shorter roll available in this color and width?
The Pura Vita collection's short-roll option is available in the two wider widths. The 43 mm width in this color is offered in the 328-foot production roll only — confirm your footage needs before ordering.
A Matched Edge That Finishes the Panel
The cut edge is the last detail that separates a cabinet-quality component from a raw panel, and a manufacturer-matched roll in the same decor is the straightforward way to close it. Order the roll with your Pura Vita panels and the edging is solved before the job starts.
