Gessato ABS Edgebanding For Wide Panels and Thick Shelving
This 65 mm ABS edgebanding in Saviola color GSP20 Moca delivers a factory-matched edge for decorative panels finished in the Gessato texture family. At 1 mm thick and 65 mm wide, it is sized for panels thicker than the standard 19 mm board — giving fabricators the overhang needed to trim flush on slab doors, thick shelving components, and double-layered assemblies where a narrower tape simply does not cover.
Key Features
- Gessato texture match: surface texture and color are produced to align with Saviola Gessato-finish panels in the GSP20 Moca decor.
- 65 mm width: the wider format accommodates panels beyond 19 mm and leaves enough overhang for clean trimming on both faces.
- 1 mm ABS construction: chlorine-free polymer provides dimensional stability and holds a precise color and gloss match across the roll.
- 328-foot production roll: a full-length roll supports high-volume runs without a mid-job splice.
- Saviola collection matching: color code GSP20 ties directly to the Saviola panel program, keeping face and edge consistent across the job.
Where This Edgebanding Earns Its Place
The 65 mm width is the right call when the panel it covers is thicker than a standard 3/4-inch board. Doubled substrate for a heavy-duty shelf, a laminated countertop backer, a thick slab door built from two bonded panels — these are the places where a 23 mm or 43 mm tape runs short and leaves exposed core at the trimmed edge. Running the 65 mm format through an edgebander gives the operator room to trim both faces cleanly without crowning the edge. The Gessato texture and GSP20 Moca color carry the same visual character the panel face presents, so the finished component reads as one material from face to edge rather than as a faced board with a visible seam.
Material and Finish Details
ABS — acrylonitrile butadiene styrene — is the standard polymer for European decorative panel programs because it is chlorine-free, dimensionally stable, and capable of holding a tight color and texture match across a long roll. Where specifications restrict PVC, ABS is the material that clears them. At 1 mm, this tape applies on any edgebander set for standard European banding stock and trims without chipping at the cut. The Gessato finish is a textured surface character within the Saviola collection — not a gloss, not a plain matte, but a structured feel that gives the edge the same tactile quality as the panel face it meets.
Who Orders This Roll
Cabinet shops running Saviola Gessato panels in GSP20 Moca are the core buyer, particularly those working on components where panel thickness pushes past 19 mm. A 328-foot roll suits a production environment comfortably — it is enough footage to cover a full kitchen or a large closet system without a color break. Designers and millwork shops specifying the Saviola collection for commercial interiors also reach for this width when the design calls for a substantial visual edge rather than a whisper-thin banding line. For a small one-cabinet repair or a single door, the long roll is more footage than necessary, but for anything running more than a few sheets it is the efficient choice.
Why does the 65 mm width matter if my panels are 19 mm?
It usually does not — a 23 mm band covers a 19 mm panel with room to trim. The 65 mm width exists for thicker stock: doubled substrates, heavy shelving cores, and laminated assemblies where anything narrower would leave exposed core after trimming. If your panels are standard 19 mm, the 23 mm width is the more economical choice.
Is this the same ABS edgebanding used on Saviola Gessato panels from the Saviola collection?
Yes. GSP20 Moca edgebanding is produced by the Saviola program as the matching band for panels carrying that color code in the Gessato finish family. Ordering against the color code ensures the texture and color are made to align with the panel face.
Can this tape run on a standard automatic edgebander?
A 1 mm ABS tape in this width runs on any edgebander set up for European banding stock at standard thickness. No special setup is required beyond confirming the machine's tape path accommodates the 65 mm width — most production edgebanders handle it without modification.
Does ABS meet specifications that restrict PVC edgebanding?
Yes. ABS is chlorine-free, which is the property that disqualifies PVC under those specifications. Where a project document or a regional requirement excludes PVC banding, ABS is the compliant alternative.
The Right Edge for a Substantial Component
Thick panels deserve an edge that keeps up with them. This 65 mm Gessato ABS roll in GSP20 Moca closes the cut edge cleanly, carries the Saviola color across the full component, and gives a production shop enough footage to finish a large run without interruption.
