Edgebanding For Panels That Need a Finished, Matched Edge
This 43mm ABS edgebanding in Saviola color GSP20 Moca with a Gessato finish is designed to close the cut edges of Saviola collection decorative panels in the same color and surface character. At 1 mm thick and supplied on a 328-foot roll, it gives cabinet shops and millwork operations the quantity and quality to work through a full run without switching rolls mid-job.
Key Features
- Matched to Saviola GSP20 Moca panels — the color and Gessato texture align with the panel face for a seamless edge-to-face read.
- 43mm width — sized to trim flush on panels up to roughly 38mm thick, with overhang on both faces for a clean cleanup pass.
- 1 mm ABS construction — chlorine-free polymer resists chipping along a busy cabinet edge better than thin foil banding.
- 328-foot production roll — enough footage to cover a complete project run without a mid-job reorder.
- Gessato surface finish — the textured face matches the Gessato emboss on the corresponding panel, so the transition from face to edge carries the same tactile character.
Where This Edgebanding Fits the Work
The 43mm width is the go-to choice when a panel edge will be visible and the thickness calls for a wider band than the standard 23mm. It suits cabinet carcasses, shelf edges, door stiles, and drawer fronts where the exposed edge needs to present as a finished surface. On a tall pantry cabinet or a run of open shelving, a 43mm band applied and trimmed correctly disappears against the face — the edge reads as part of the panel, not as an afterthought. The Gessato finish on this band matches the structured texture of the Saviola panel program, which matters most under raking light or where the edge catches direct view.
Material and Construction
ABS polymer is the right material choice where a PVC-free specification is in play, and it holds color and gloss class well enough for a proper match to a TFL decorative panel. The 1 mm caliper gives the band enough body to absorb light contact without telegraphing a chip or a dig through to the substrate. Saviola panels carry a CARB2 compliant hardwood particleboard core, and this edgebanding is the vendor-sourced match for the collection — color code, finish, and texture are coordinated at the factory level, not approximated after the fact.
Who Orders This Roll
Cabinet shops running Saviola panels in Moca order this roll to keep the color consistent from face to edge across every component. The 328-foot length suits a production environment where a short roll would run out before the job is done and a mid-run color switch is not an option. Designers and commercial millwork operations specifying the Saviola collection by color code will find this the only vendor-coordinated match for GSP20 Moca in the 43mm width. For a small repair or a single-cabinet job, consider whether the 23mm roll in the same color covers the panel thickness in use — the wider band is the right call when the substrate is thicker or when the edge is a prominent visual feature.
Does this banding come pre-glued?
No. This is unglued edgebanding for use with an automatic or manual edgebander equipped with a glue pot. It is not iron-on banding.
What panel thickness does a 43mm band work with?
A 43mm width gives enough overhang to trim cleanly on panels from roughly 19mm up to about 38mm thick. For standard 19mm panels, the 23mm band is the more common choice — the 43mm is the right call on thicker substrates or where the wider band is a design preference.
Will this band match the Gessato texture on my Saviola panels exactly?
This banding is sourced from the Saviola program to coordinate with the Gessato finish family in color GSP20 Moca. As with any textured edgebanding, the emboss on the band approximates the panel face texture — a perfect registration across every panel-to-edge joint is not guaranteed, but the color and finish character are matched at the collection level.
Is ABS edgebanding acceptable on projects that restrict PVC?
Yes. ABS is chlorine-free, which satisfies specifications and green building programs that exclude PVC from interior finish materials. Confirm the specific project requirement with the specifier, but ABS is the standard response to a PVC-free edge tape requirement.
The Right Edge for a Coordinated Finish
A panel that finishes strong on every visible edge is the difference between a component and a cabinet. This roll keeps the Saviola Moca color consistent from face to edge, so the finished piece holds together the way it was specified.
