Saviola ABS Edgebanding in Dayton Rift with a Chandler Finish, 43mm width x 328' length roll, 1mm Thick

Chandler-Finish ABS Edgebanding For Dayton Rift Panel Edges

This is SALT Saviola ABS edgebanding in color GSAV1 Dayton Rift, a 43mm wide, 1 mm thick roll sized to trim flush on standard 19 mm panels. The Chandler finish pairs with the Dayton Rift rift-cut wood decor across the Saviola TFL collection, keeping the cut edge consistent with the panel face on every exposed component.

Key Features

• Vendor-matched color GSAV1 Dayton Rift ties this band directly to its Saviola panel counterpart for a seamless edge-to-face read.
• 43mm width provides enough overhang on a 19 mm panel to trim both faces clean in a single edgebander pass.
• 1 mm ABS construction is chlorine-free, dimensionally stable, and accepted by specifications that exclude PVC.
• 328-foot production roll supports continuous runs and volume cabinet jobs without mid-run splicing.
• Chandler finish reproduces the rift-cut texture character of the panel face at the edge, so the band does not read as a different surface under raking light.

Where Dayton Rift Edgebanding Does Its Work

A rift-cut wood decor depends on consistent linear grain across every visible surface. That consistency breaks the moment a cut edge exposes raw particleboard, which is why matched edgebanding matters more in a straight-grain program than in a heavily figured one. Dayton Rift cabinets built for contemporary kitchens, open wardrobes, and commercial millwork all share the same demand: the edge must carry the grain story the panel starts. This roll handles that job on door stiles, shelf edges, drawer fronts, and any component where both face and edge land in the line of sight. At 328 feet, a single roll covers a meaningful run of cabinet parts without reordering mid-job.

ABS Material and Chandler Finish Construction

ABS edgebanding is extruded from acrylonitrile butadiene styrene polymer, which bonds cleanly in a standard edgebander without the adhesion variability that can affect some PVC stocks. Because it contains no chlorine, it clears green building specifications and institutional project requirements that list PVC exclusions. The Chandler finish on this band is calibrated to the Saviola Dayton Rift panel, so the gloss level and texture character align with the face rather than standing slightly apart from it. The 1 mm thickness gives the edge enough body to survive a handled cabinet component without being thick enough to show a visible step at the glue line after trimming.

The Right Fit: Shops Running Saviola Dayton Rift

This roll is the correct companion purchase for any job specifying GSAV1 Dayton Rift panels from the Saviola collection. Cabinet shops building kitchen and bath boxes, commercial millworkers fitting out offices and hospitality spaces, and designers who have specified Dayton Rift for a continuous wall of storage all need a banding stock that does not require a separate color-match decision. Because the vendor produces this band against the same Dayton Rift decor used for the panel, the match is built into the part number rather than approximated from a third-party roll. The 43mm width works with the standard 19 mm panel thickness in this program, and the production roll length suits shops that process multiple jobs in the same color.

One Roll, One Color, One Less Decision on the Job

Matching banding shipped from the same vendor as the panel removes the color-chase step from the workflow. Order GSAV1.43MM alongside the Dayton Rift panel and the edge is handled before the sheet hits the saw.