Saviola ABS Edgebanding for Cabinets and Casework in Canyon Coco
This is the factory-matched ABS edgebanding for the Saviola collection in Canyon Coco (GSD19), supplied in a 328-foot production roll at 43 mm wide and 1 mm thick. It is designed to close the cut edge of a Canyon Coco panel so that face and edge read as a continuous surface rather than a faced board with an exposed core.
Key Features
- Factory color match to GSD19 Canyon Coco in the Artwood finish, so the edgeband aligns with the panel decor without a visible seam.
- 43 mm width provides adequate overhang on a 19 mm panel for a clean flush trim on both faces.
- 1 mm ABS thickness delivers impact resistance and edge durability well suited to casework that sees regular handling.
- 328-foot roll supports production runs without mid-job roll changes on a standard edgebander.
- Chlorine-free ABS polymer clears specifications that restrict PVC, making this banding compatible with projects where PVC is excluded.
- Artwood finish carries the same structured wood texture as the panel face onto the edge, so the surface character continues around the component.
Where This Edgebanding Fits the Job
Canyon Coco reads as a warm, mid-tone brown with the depth and texture of the Artwood finish family. It suits contemporary kitchen cabinetry, residential closet systems, retail fixtures, and commercial millwork where a wood-look panel in that tone is specified. The 43 mm width is the right call for 19 mm panels, which make up the majority of casework box and door components. If a shop is running Canyon Coco panels throughout a job, a 328-foot roll covers a substantial run before a changeover is needed.
Note that Canyon Coco (GSD19) is a discontinued color selling through remaining inventory. It is well suited for a self-contained project or a single installation, but should not be specified for a job that will require additional material in a future phase, since availability cannot be guaranteed beyond current stock.
Material and Construction
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a chlorine-free thermoplastic. It machines cleanly on standard edgebanding equipment and accepts a flush trim without chipping at the corner. Because it carries no chloride content, it is compatible with projects or jurisdictions where PVC banding is restricted. The Artwood finish on this roll is produced to coordinate with the same finish family on the Saviola panel program, so the texture character at the edge matches what the face presents.
Who Orders This Roll
Cabinet shops running the Saviola collection in Canyon Coco are the primary buyer, sourcing this roll to complete the edge detail on panels already in the cut list. Millworkers building commercial fixtures and store interiors in a warm wood palette also reach for it when Canyon Coco is the specified decor. Because the roll length suits production volume, it fits shops that run edgebanders continuously rather than shops looking for a short-run option. Designers specifying the Saviola collection should confirm panel availability for GSD19 before including this color in a long-term or multi-phase project.
Is this edgebanding pre-glued, or does it require a separate adhesive?
This roll is not pre-glued. It is intended for application on a standard edgebanding machine using a hot-melt glue pot. It is not an iron-on product.
Does this banding work on panel thicknesses other than 19 mm?
At 43 mm wide, this roll has enough width to trim flush on panels ranging from approximately 16 mm to 25 mm, as long as the overhang is sufficient for the machine's trimming path. Confirm your edgebander's trim capacity against the panel thickness before running.
Why is Canyon Coco listed as discontinued, and can I still order it?
SALT has issued a discontinuation notice for GSD19 Canyon Coco. The color remains orderable while inventory lasts, so current orders are fulfilled normally. Once stock is depleted, the color will no longer be available. Plan the full material quantity before placing the order rather than relying on a follow-up purchase.
Is matching HPL available for Canyon Coco in the Saviola collection?
Matching high pressure laminate is part of the Saviola collection program and is available in GSD19. Because GSD19 is discontinued and selling through, confirm HPL availability separately before specifying it on a project.
Complete the Edge Detail on Every Canyon Coco Cut
A panel edge that matches the face is what separates a finished component from raw sheet goods. This roll delivers that match for every Canyon Coco cut in the job, in a production length that keeps the machine running without interruption.
