Deep Charcoal Edgebanding Sized for 19 mm Panels and Long Runs
This is the SALT Saviola ABS edgebanding in color GSDH3 Carbone, 23 mm wide and 1 mm thick, supplied on a 328-foot production roll. It is produced to match the Carbone decor in the Saviola collection, so a cut edge reads as a continuous surface rather than an exposed core. The Vetta finish carries the same texture the panel presents, tying face and edge together under raking light.
Key Features
- Color-matched to Saviola GSDH3 Carbone — face and edge share the same deep charcoal decor for a seamless finished look.
- Vetta finish — the edgebanding texture aligns with the panel's surface so the edge does not read differently from the face.
- ABS construction — chlorine-free polymer that clears specifications restricting PVC and holds color stability over time.
- 23 mm width — sized to overhang a 19 mm panel on both faces, leaving enough material to trim flush cleanly.
- 328-foot production roll — suited to high-volume runs through an edgebander without mid-job splicing.
- 1 mm thickness — standard callout for machine application on flat panels and linear cabinet components.
Where Carbone Edgebanding Earns Its Keep
Dark decors expose bad edgework more than lighter ones. A pale or mismatched edge on a charcoal panel face is visible from across the room, while a well-matched band disappears entirely. GSDH3 Carbone is a deep, near-neutral tone that appears across cabinet boxes, open shelving, and wall panel systems where the exposed edge is always in view. Shops running large closet builds, commercial millwork, or retail fixture work in this color will go through footage quickly, and the 328-foot roll keeps the job moving without a reel change mid-panel.
The banding is also the right call for designers specifying from the Saviola collection who need every touchpoint in the build to carry the same surface language — not a close third-party match, but the vendor's own color-matched strip.
ABS Construction and the Vetta Finish in Practice
ABS edgebanding is chlorine-free, which matters on commercial projects that exclude PVC by specification. It machines cleanly — scraping and trimming produce a crisp arris without the gummy behavior some polymers show on a busy edgebander. The material holds its color and does not yellow or become brittle over the life of a cabinet.
The Vetta finish is the texture character of this panel family. Where a plain matte band would sit flat against a textured face, a matched finish reads as one continuous surface. This is most noticeable on dark tones like Carbone, where any texture mismatch at the edge joint is easy to see in direct light.
Who Orders This Roll and Why
Cabinet shops running the Saviola collection in Carbone are the core buyer here. A 328-foot roll fits a production edgebander and handles a meaningful run of parts before the reel needs changing. Small millwork operations building out a single wall or closet system in this color will still have footage left, but the roll size is priced and packaged for production use.
Interior designers and specifiers who have called out GSDH3 Carbone panels on a project should confirm the matching banding is on the same purchase order. A mismatch discovered after the panels are cut is a problem that costs more to fix than the banding was worth.
Frequently Asked Questions
Is this edgebanding ready to apply with a glue pot, or does it come pre-glued?
This roll is unglued and intended for machine application with a hot-melt adhesive edgebander. It is not an iron-on product. If your shop runs a manual or handheld process, confirm you have a glue pot or adhesive-back option available before ordering.
Does the 23 mm width work on panels thinner than 19 mm?
Yes. The 23 mm width gives enough overhang to trim flush on panels thinner than 19 mm as well. Thinner stock leaves more material to remove on each pass, but the band applies and trims the same way.
How does ABS differ from PVC edgebanding for this application?
Both materials machine similarly on a standard edgebander. ABS is chlorine-free, which satisfies commercial and institutional specifications that exclude PVC. If the spec sheet for your project calls out chlorine-free banding, ABS is the compliant choice.
Is matching edgebanding available in wider widths for thicker panels?
The Saviola collection offers matching edgebanding in 43 mm and 65 mm widths as well, in 328-foot rolls. Short 54-foot rolls are available in those two wider sizes for smaller jobs. The 23 mm width is available in the 328-foot roll only.
The Right Edge for a Panel That Cannot Afford a Mismatch
Deep tones do not forgive an edge that does not match, and Carbone is exactly that kind of color. This roll is the vendor's own match — same decor, same finish family, same collection — so the edge holds up to scrutiny whether the work is a production cabinet run or a single bespoke wall panel.
