Wide-Format ABS Edgebanding For Thick Panels and Exposed Shelving
This is a 65 mm wide, 1 mm thick ABS edgebanding in Carbone (GSDH3) from the Saviola collection by SALT International, supplied on a 328-foot roll. The 65 mm width is the widest in the Saviola edgebanding range, matched to thicker panels and applications where extra overhang for trimming is required. The Vetta finish coordinates with Saviola TFL panels in the same color, giving fabricators a clean, unified edge on every visible surface.
Key Features
- 65 mm wide ABS strip provides generous overhang on thick substrates and double-layer panel constructions.
- 1 mm thickness delivers a durable, impact-resistant edge profile with a solid feel under the hand.
- Carbone (GSDH3) color is a deep charcoal that carries through from the Saviola panel face to the cut edge.
- Vetta finish matches the emboss and sheen of Saviola TFL panels in this decor for a continuous surface reading.
- ABS polymer construction is chlorine-free, clearing specifications that restrict PVC banding.
- 328-foot production roll suits volume runs and multi-project shops without frequent re-ordering.
Where the 65 mm Width Earns Its Place
Most edgebanding decisions start at 23 mm and step up as panel thickness or layup depth increases. The 65 mm band is the choice when the panel stack is deep enough that a narrower strip would trim flush with little margin for error, or when a design calls for a thick, bold edge reveal. It is also the practical option on double-layered substrate constructions, commercial shelving units with high-edge visibility, and architectural millwork where the edge is as designed as the face. Carbone is a versatile deep charcoal that reads as a strong contrast against light decors and as a tonal match against darker ones, which makes it a common specification for contemporary commercial interiors and residential closet systems alike.
Material and Finish
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a chlorine-free polymer that satisfies specifications excluding PVC. It holds color consistently along a production roll and machines cleanly on standard edgebanders. At 1 mm, the strip is substantial enough to protect the panel edge from incidental impact without adding visible bulk to a finished joint. The Vetta finish is the vendor's name for the surface character applied to this decor, and it is the same finish specification used on matching Saviola TFL panels, so the face and the edge share the same texture and sheen level. Color GSDH3 Carbone is a dark charcoal with warm undertones, part of the confirmed Saviola stocking program.
Who Reaches for This Roll
Cabinet shops processing Saviola TFL panels in Carbone will run this banding to close out sheet edges without a color break. Commercial millwork fabricators specifying thick or laminated substrates find the 65 mm width the safest working option. Designers who have called out Carbone as a system color across casework, shelving, and wall panels use the matching banding to carry that specification through every exposed edge. The 328-foot roll length is sized for production environments, so it is best suited to shops running enough linear footage to justify a full roll in one color rather than shops piecing together a single project.
Will this edgebanding cover a 19 mm panel edge cleanly?
Yes. At 65 mm wide, the strip leaves substantial overhang above and below a standard 19 mm panel, giving the edgebander plenty of material to trim flush on both faces. The extra width is the point of this SKU — it handles thicker substrates without running tight on trim allowance.
Is this banding compatible with automatic edgebanders?
ABS banding in this format runs on standard automatic edgebanding machines that accept 1 mm stock. Confirm your machine's maximum banding width against 65 mm before loading, as some entry-level machines have width limits below the wider commercial formats.
Does matching Saviola TFL panel exist in Carbone?
Carbone (GSDH3) is part of the stocked Saviola TFL collection. Matching panels are available and are the product this edgebanding is designed to coordinate with. Confirm the panel SKU is in the Saviola collection and carries the GSDH3 color code to ensure finish alignment.
Why choose ABS over PVC banding for this application?
ABS is chlorine-free, which matters for projects subject to PVC-restricted specifications, including some commercial, healthcare, and LEED-influenced builds. Beyond compliance, ABS maintains consistent color and profile across a production roll and machines without the softening behavior PVC can exhibit under high heat.
The Right Edge Closes the Job
A finished panel face loses its effect the moment the cut edge reads as raw board. Carbone edgebanding in the 65 mm width gives fabricators the coverage and the color match to take a Saviola Carbone installation all the way to the edge, with a roll length that supports a full production run rather than a patch-together order.
