Wide-Format ABS Edgebanding for Thick Panels in Carbone
This is the 65 mm wide ABS edgebanding in color GSDH3 Carbone, supplied by SALT International in a 54-foot roll at 1 mm thick with a Vetta finish. It is designed to close the cut edges of thicker decorative panels in this deep charcoal decor, producing a finished edge that reads as a continuous surface from face to edge.
Key Features
- 65 mm width covers the edges of thicker panel stock and provides plenty of overhang for a clean trim on both faces.
- 1 mm ABS thickness adds a durable, impact-resistant edge layer that holds up to daily contact.
- Vetta finish matches the surface texture of Saviola panels in this decor so face and edge read as one.
- 54-foot roll is sized for a focused job run without committing to a full production roll.
- ABS polymer construction is chlorine-free, meeting specifications that restrict PVC.
- GSDH3 Carbone color code ties directly to the Saviola panel program for verified decor matching.
Where This Edgebanding Fits the Work
The 65 mm width is the widest in the Saviola edgebanding program, chosen for panels thicker than the standard 19 mm range or for applications where a generous overhang simplifies the trimming step. Cabinet boxes built from 25 mm or thicker substrate, furniture components with stacked cores, and commercial fixtures that run heavier panel stock are the natural home for this width. The Carbone color is a rich, near-black charcoal that suits contemporary kitchen fronts, closet interiors, and retail display work where a dark, grounded palette is the design intent. The 54-foot roll handles a moderate shop run cleanly, making it a practical choice when the job does not justify stocking a full production roll in this width.
Material and Finish Detail
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a chlorine-free thermoplastic that processes cleanly through standard edgebanders and finishes without chipping at the trim pass. At 1 mm, the tape adds a meaningful protective layer at the edge without building out noticeably against adjacent hardware or door reveals. The Vetta finish coordinates with the emboss on matching Saviola TFL panels in GSDH3 Carbone, so the texture at the edge does not break the visual read of the face. Color and texture fidelity are governed by the GSDH3 part number, not by approximate color matching.
Who Orders This Width
Cabinet shops and commercial millwork operations working with thicker panel programs reach for the 65 mm width when the narrower 23 mm or 43 mm bands leave too little margin on a wider edge. Designers specifying contemporary work in dark color palettes will find that Carbone sits cleanly in schemes built around matte black or anthracite tones without reading as a mismatch. The 54-foot roll format is also practical for smaller operations that cycle through multiple colors and prefer not to carry large footage in any single decor.
What panel thickness is the 65 mm width intended for?
The 65 mm width provides overhang on panels up to roughly 50 mm thick and is the appropriate choice anywhere the narrower 23 mm or 43 mm widths would leave insufficient material to trim both faces cleanly. It is the standard selection for stacked or thicker-core panels.
Is this banding PVC-free?
Yes. ABS is a chlorine-free polymer, which means it meets specifications and green building programs that restrict or exclude PVC edgebanding. It is not PVC and should not be substituted for a specification that calls for PVC specifically.
Does the Vetta finish match Saviola TFL panels in GSDH3?
The Vetta finish on this edgebanding is produced to coordinate with the surface texture of Saviola panels carrying the GSDH3 Carbone decor. For verified matching, confirm that the panel and banding share the same color code and finish family before ordering.
Can this roll be applied with a portable iron or a light-duty machine?
This banding is unglued and requires a glue pot or a machine with a hot-melt glue system. It is not pre-glued and will not bond with an iron alone. For iron-on application, a pre-glued roll is the correct product.
Closing the Edge on a Carbone Build
When the panel face is already committed to GSDH3 Carbone, the edge is the last detail that either holds the design together or breaks it. This 65 mm ABS roll in the matching Vetta finish keeps that detail tight, whether the job is a single accent piece or a full run of thick-panel cabinet boxes.
