Manhattan-Finish ABS Edgebanding for a Clean, Consistent Edge
This SM'art ABS edgebanding in color Chrysler (SMM021) delivers a precisely matched edge for SM'art decorative panels finished in the Manhattan texture family. At 23 mm wide and 1 mm thick on a 328-foot production roll, it is sized for cabinet shops and commercial millwork operations that need a reliable supply of color-matched banding without sourcing from a third party.
Key Features
- Color-matched to SM'art Chrysler panels so the edge reads as a continuous surface against the face.
- ABS polymer construction is chlorine-free, clearing specifications that restrict PVC edgebanding.
- Manhattan finish coordinates the edge texture with the SM'art Manhattan surface family for a consistent look on cabinet faces and boxes.
- 23 mm width trims flush on a 19 mm panel with enough overhang to clean up both faces cleanly.
- 328-foot production roll supports extended runs without a mid-job roll change.
- 1 mm thickness works with standard edgebander settings across the most common machine configurations.
Where This Edgebanding Earns Its Place on the Job
Cabinet boxes and door frames built from SM'art panels show every edge. A close color match between face and band is what keeps a finished piece looking intentional rather than assembled. Chrysler is a mid-tone color in the SM'art line, and this roll delivers the exact Manhattan surface character at the edge so nothing breaks the read across face and band. It works on cabinet carcasses, shelf edges, drawer fronts, and door perimeters wherever the SM'art Chrysler decor is already in the layout.
For commercial millwork and high-volume residential cabinet runs, the 328-foot roll minimizes downtime at the edgebander. A shop building a full kitchen or a run of closet systems can pull from a single roll through most of the job rather than swapping mid-sequence.
Material and Construction
ABS edgebanding is the standard for European-origin decorative panel programs, and SM'art is no exception. ABS is dimensionally stable and holds color and gloss matching tightly enough to satisfy the kind of close-tolerance color work that Manhattan-finish panels require. The chlorine-free formulation means it fits naturally into commercial specifications that prohibit PVC, a common requirement in healthcare, education, and LEED-tracked projects. At 1 mm, the band is thick enough to resist edge impact without adding visible bulk to the joint.
The Right Fit for This Roll
This edgebanding is the right choice for cabinet shops and millwork operations already running SM'art panels in the Chrysler color. It is sized for production work: the 328-foot roll suits shops that go through banding at volume and want to keep the matching color on the shelf rather than ordering roll by roll. Designers specifying SM'art for commercial interiors can call out this roll alongside the panel to ensure the edge treatment is documented as part of the finish package.
Does this edgebanding require a special adhesive or machine setup?
This roll is supplied without pre-applied adhesive, so it runs through a standard edgebander with a glue pot. No special setup is required beyond matching your machine's feed and temperature settings to a 1 mm ABS band, which is a routine configuration on most production edgebanders.
Is this the only roll width available for the Chrysler color in SM'art?
SM'art edgebanding in this color is available at 23 mm wide. Confirm available widths at the time of order if your shop uses a different panel thickness that would require a wider band.
Why choose ABS over PVC edgebanding for this application?
ABS is chlorine-free, which satisfies specifications that exclude PVC on environmental grounds. It also holds color and gloss matching closely, which matters on a textured finish like Manhattan where a mismatched sheen on the edge stands out. For general cabinet work with no specification restriction, either material performs well mechanically.
Can this edgebanding be used on panels from other SM'art colors or collections?
This roll is color-matched specifically to SM'art Chrysler (SMM021). Using it on a different color would produce a visible mismatch at the edge. Each SM'art color has its own matched edgebanding, so order the roll that corresponds to the panel color in your layout.
One Roll, One Color, No Guesswork at the Edge
When the panel color and the edge banding come from the same program, the edge disappears into the face the way it should — and the finished piece looks specified rather than pieced together.
