Edgebanding For Wide Panels and Tall Door Fronts
This is SALT Pura Vita ABS edgebanding in color PVRV02 Rovere Verona, a Natural Grey Oak Soft Brushed finish supplied as a 65 mm wide, 54-foot roll at 1 mm thick. The wider 65 mm strip is sized for thicker panel stock and for cuts where a narrower band would leave the edge short, making it the right call for tall door fronts and wide carcass components finished in Rovere Verona.
Key Features
- 65 mm width provides sufficient overhang on thicker substrates and oversized edges, trimming flush without pulling short.
- Natural Grey Oak Soft Brushed finish carries the Pura Vita Rovere Verona decor continuously from panel face to cut edge.
- ABS polymer construction is chlorine-free, clearing specifications that exclude PVC and common in European-origin panel programs.
- 1 mm thickness gives the applied edge enough body to shape and trim cleanly on standard edgebanding equipment.
- 54-foot roll covers a focused job run without committing the shop to a full 328-foot production coil.
- Pura Vita collection match is a vendor-published color match, so the band and the panel face read as one surface at the joint.
Where the 65 mm Width Earns Its Place
Most edgebanding programs offer the widest width as a short roll specifically because demand is narrower. The 65 mm strip is the choice when the panel edge is thick enough that a 23 mm or 43 mm band trims too close, or when a fabricator wants extra material to work with on a profiled or rounded edge. It handles tall slab door fronts where the edge height is not the panel thickness but the full door length on a stile edge — a run that rewards the wider strip. It also suits shops building thick countertop build-ups or stacked-panel components in the Rovere Verona color where a hairline gap between two narrower bands is not acceptable.
Material and Finish Details
ABS is the standard banding polymer for European decorative panel programs, and the Pura Vita collection follows that convention. Unlike PVC, ABS is chlorine-free, which matters on specifications for commercial interiors, healthcare environments, and LEED-aligned projects. The Rovere Verona decor is a Natural Grey Oak with a soft brushed surface treatment, meaning the face carries a light tactile relief that follows the grain and picks up the same low-angle light behavior as the matching veneer panel. The 1 mm thickness is the production standard for this collection, and the color is matched by the panel maker, so the grain direction and tone are coordinated rather than approximated.
Who Specifies This Roll
Fabricators building out a Pura Vita Rovere Verona project who need the wider strip — thick carcass panels, multi-layer build-ups, or door fronts with profiled edges — will reach for the 65 mm roll. The 54-foot length suits a single cabinet run or a focused commercial install rather than a high-volume shop cycling through a full collection. Designers specifying Rovere Verona for a contemporary interior where the panel edge is part of the visible detail benefit from a band that genuinely disappears at the joint rather than reading as an add-on. The ABS construction also satisfies specifications that call out chlorine-free materials without requiring a material substitution.
Does the 65 mm roll come in a longer 328-foot option for higher-volume use?
The 54-foot roll is the standard offering for the 65 mm width in the Pura Vita collection. Confirm availability of longer production rolls with your sales contact if a large run requires it.
Is the Rovere Verona soft brushed texture visible on the applied edge, or does banding flatten it?
The banding carries the same soft brushed surface print as the panel face, so the tactile character reads consistently across the joint. The relief is produced in the ABS face layer, not in a separate coating, so it survives normal trimming.
Can this banding be applied with a manual iron rather than an automated edgebander?
This roll is unglued and is designed for machine application with a glue pot or hot-melt edgebander. For iron-on application, a pre-glued version would be needed — confirm whether one exists for this color before ordering for a manual repair or site touch-up.
What Pura Vita panel products does this edgebanding match?
The PVRV02 band is the vendor-published match for Pura Vita panels in the Rovere Verona color. It is not a match for panels in other SALT collections or other colors, even where the decor appears similar.
One Color, Carried Through Every Edge
A panel that finishes with matching banding reads as a single material rather than a faced board. The 65 mm Rovere Verona roll gives fabricators working with thicker stock or complex profiles the width they need to close every edge cleanly, in the one color the Pura Vita collection publishes for it.
