Natural Grey Oak Soft Brushed Edgebanding for Veneer Panel Work
This 43 mm ABS edgebanding is the factory-matched companion to the Pura Vita Rovere Verona decorative panel, carrying the natural grey oak soft brushed finish from the face all the way to the cut edge. Supplied on a 54-foot roll, 1 mm thick, it is sized and calibrated to close the edge of a Pura Vita panel so the finished component reads as one continuous surface.
Key Features
- Factory color match to Pura Vita Rovere Verona (PVRV02): Produced by the same manufacturer as the panel, so the grain tone and soft brushed texture align at the edge without a visible seam.
- 43 mm width: Sized to overhang a 19 mm panel on both faces, leaving enough material to trim flush cleanly on an automatic edgebander or by hand.
- 1 mm ABS thickness: Thick enough to protect the core edge from impact while remaining compatible with standard edgebander pressure settings.
- Chlorine-free ABS construction: Meets specifications that exclude PVC, a common requirement in commercial and institutional casework.
- 54-foot roll: A short-run quantity that suits a single project or a color trial without committing to a production-length roll.
- Soft brushed surface character: The light brushing on the face lifts the grain just enough to add tactile depth, consistent with the Pura Vita veneer panel program.
Where This Edgebanding Fits the Job
Rovere Verona is a natural grey oak with a soft brushed finish, a look that reads well on contemporary closet systems, freestanding storage, and architectural millwork where a restrained wood tone is wanted without the warmth of a brown oak. This banding closes the edges of shelves, cabinet sides, and door blanks cut from the Pura Vita panel so the color reads consistently whether a surface is viewed face-on or from the side. The 54-foot roll suits a smaller cabinet run or a designer sample build where one panel yields all the parts and the edge detail needs to match precisely.
Material, Construction, and Finish
ABS is the standard edgebanding polymer for European decorative panel programs and for any specification that restricts PVC. It bonds cleanly with standard hot-melt adhesive, trims without chipping, and holds its color without the yellowing that can affect some PVC formulations over time. The soft brushed finish on this banding mirrors the surface treatment of the Pura Vita veneer panel — a light mechanical brushing that raises the grain slightly without opening the pore fully. That consistency is what makes a matched set read as a single material rather than a panel with banding added.
Who Orders This and Why
Cabinet shops specifying the full Pura Vita program reach for this banding to complete a Rovere Verona build without sourcing a close third-party color that never quite matches under a raking light. Designers and millwork fabricators working on showroom fixtures or residential interiors use the 54-foot roll to finish a specific job and keep color control tight. The chlorine-free ABS construction also satisfies commercial project specifications that require PVC-free materials throughout.
Does this edgebanding come pre-glued?
No. This roll is unglued and intended for application with a hot-melt adhesive on an automatic edgebander or a hand-held edge applicator. Pre-glued iron-on banding is a separate product type and is not part of the Pura Vita program.
Is 43 mm the right width for a 19 mm panel?
Yes. A 43 mm band provides enough overhang on both faces of a 19 mm panel to trim flush cleanly, which is the standard sizing for this panel thickness. If you are working with a different panel thickness, confirm the edgeband width covers both faces with margin to trim.
What panel does this banding match?
It matches the Pura Vita Rovere Verona decorative panel, color code PVRV02. That panel is a real wood veneer product with a natural grey oak soft brushed face. This banding is produced by SALT International to coordinate with that specific decor and finish.
Can I use this banding with panels from a different collection?
The color and finish are matched to the Pura Vita program. Whether it pairs acceptably with a panel from another collection depends on how closely the grey oak tone and brushed texture align with that panel's face. For a verified match, pair it with the Pura Vita Rovere Verona panel it is designed for.
The Right Edge for a Matched Build
When the edge matches the face, a cut panel stops looking like a cut panel. This Rovere Verona ABS banding gives a Pura Vita build the finished detail that holds the design together from every angle.
