Loom-Finish ABS Edgebanding for Warm Neutral Cabinet Work
This is the SALT Saviola matching ABS edgebanding in color GSAH6 Crema, supplied in a 23 mm wide, 1 mm thick, 328-foot production roll. The Loom finish pairs a soft, woven surface character with the warm off-white Crema tone, making it the correct edge solution wherever Saviola Crema panels are in the cut list.
Key Features
- Vendor-matched color GSAH6 Crema — produced by SALT International to align with Saviola Crema TFL panels at the face and edge.
- ABS polymer construction — chlorine-free extrusion that clears specifications where PVC is restricted.
- Loom surface finish — a textured, woven-pattern emboss that carries the panel's character onto the edge.
- 23 mm width — sized to overhang a 19 mm panel on both faces for a clean trim pass.
- 328-foot production roll — full-length roll suited to continuous edgebander runs and multi-cabinet project runs.
- 1 mm thickness — standard thickness for automated edgebanding equipment and glue-pot application.
Where This Edgebanding Earns Its Place
Crema is a warm neutral that shows up in kitchen casework, built-in cabinetry, closet systems, and retail millwork where a clean, light tone keeps the overall palette open. Every cut edge on a Saviola Crema panel is a candidate for this banding: shelf fronts, cabinet box edges, door perimeters, and drawer faces. Because the color and surface finish are produced to match the panel program, the banding closes an edge without drawing the eye — the panel reads as a solid component rather than a faced board with a visible seam. A 328-foot roll covers enough linear footage to run a full kitchen or a sizable built-in without a mid-job roll change.
Material and Surface Construction
ABS edgebanding is extruded from acrylonitrile butadiene styrene, a polymer chosen for its dimensional stability and its ability to hold a printed decor and embossed texture in tight registration. Unlike PVC, ABS is chlorine-free, which satisfies environmental specifications that restrict halogenated materials. The Loom finish is a surface emboss that replicates a woven textile relief — it reads as a textured matte at normal viewing distance and gives the edge a tactile quality consistent with the Saviola finish family. At 1 mm the tape runs cleanly through production edgebanding equipment and bonds well with standard PUR and EVA hot-melt adhesive systems.
The Right Fit for This Roll
Cabinet shops running Saviola Crema panels as a house neutral will find the 328-foot roll the practical choice: it supports back-to-back edgebanding runs without interruption, and the coil size is standard for floor-standing edgebander dispensers. Designers specifying a warm-toned, textured-matte palette for residential built-ins or commercial millwork can rely on a documented color match rather than sourcing a close third-party substitute. Contractors finishing site-built casework who need a consistent edge on a light neutral panel will find this roll ready to run without custom ordering. Indoor cabinetry and furniture work in dry conditions is this material's environment.
Frequently Asked Questions
Does this banding come pre-glued?
No. This is unglued edgebanding intended for use with an edgebander or a glue-pot setup. It is not an iron-on product.
What panel thickness does 23 mm banding work with?
The 23 mm width is the standard match for 19 mm panels. It provides enough overhang on each face to trim flush cleanly after bonding.
Is this banding suitable for specifications that restrict PVC?
Yes. ABS is chlorine-free, so it satisfies specifications that prohibit polyvinyl chloride. Confirm the precise material requirement with your project spec before ordering.
What adhesive system does this tape work with?
Standard PUR and EVA hot-melt adhesives used in production edgebanders are both compatible with 1 mm ABS at normal process temperatures. Check your equipment supplier's adhesive guidance for the best bond on your specific machine.
Is matching HPL available for the Saviola collection?
Yes. Saviola matching HPL is stocked in two sheet sizes: 73 inch by 120 inch and 60 inch by 120 inch. The 60 inch sheet is available for shops that cannot process the wider format.
One Roll, Every Edge
When the panel and the banding come from the same program, the edge disappears — and a Crema cabinet reads as a finished piece rather than a built-up assembly. This roll keeps that match intact from the first cabinet to the last.
