Short-Roll ABS Edgebanding For Single-Job Saviola Crema Runs
This 54-foot roll of SALT Saviola ABS edgebanding in color GSAH6 Crema is the short-format option for shops finishing a single project or committing to a new color before scaling up. At 43 mm wide and 1 mm thick, the strip is matched to the Saviola Crema decorative panel program and applies cleanly on a standard edgebander or iron-on bench setup.
Key Features
- Saviola collection color match — produced in GSAH6 Crema to read as one surface against the matching TFL panel face.
- 43 mm width — sized to overhang a 19 mm panel on both faces, leaving enough material to trim flush in a single pass.
- 1 mm ABS construction — chlorine-free polymer that clears specifications where PVC is restricted.
- Loom finish — a light textile-inspired surface texture that aligns with the Crema decor's tonal character.
- 54-foot short roll — covers a focused job without the commitment of a full 328-foot production roll.
Where This Roll Fits the Job
A 54-foot roll is the right call when the linear footage is known and modest. A single upper cabinet run, a closet tower, or a bank of drawer fronts in Crema can land well under 54 feet of banded edge, making the short roll the economical choice. It also works as a test quantity when a shop is evaluating GSAH6 Crema for a larger specification before committing to a production roll. The 43 mm width handles panel thicknesses from 19 mm through the thicker 25 mm range with overhang to spare on both faces.
Material and Finish
ABS is an extruded polymer that holds a color match more consistently than PVC across production runs, which matters when banding is applied weeks or months after the panels are cut. The chlorine-free chemistry satisfies green building specifications and school or healthcare projects that exclude PVC by name. The loom finish on this roll is a low-relief surface texture rather than a plain gloss or deep matte — it gives the Crema face a subtle tactile quality that suits the warm, neutral tone of the color. Thickness at 1 mm provides enough body for a clean edge scrape without the bulk of a thicker post-formed strip.
Who Orders This Roll
Small cabinet shops doing a one-time Crema run are the primary buyer: the 54-foot format avoids tying up inventory budget in a color that may not repeat. Custom closet installers working a single unit benefit the same way. Designers and general contractors specifying GSAH6 Crema panels for a renovation can order this roll alongside the panel sheets to keep the finish consistent across every cut edge without sourcing a third-party color approximation. Because the banding comes from the same collection as the panel, the color relationship is precise rather than estimated.
Frequently Asked Questions
Will this banding work with an iron-on application, or does it require a machine edgebander?
This roll is unglued, so it applies on a machine edgebander with a glue pot. For iron-on application, a pre-glued roll is needed. Check the listing format before ordering if the shop runs a light-duty bench setup.
Is 43 mm the right width for a 19 mm panel?
Yes. A 43 mm band on a 19 mm panel leaves roughly 12 mm of overhang per face, which is well within the trim range of a standard edgebander and enough for a hand scraper on a bench job.
Does GSAH6 Crema have a matching panel in the Saviola collection?
Yes. GSAH6 Crema is a stocked color in the Saviola TFL panel program, so the banding and the panel ship from the same collection and carry the same color code.
What is the difference between this short roll and the 328-foot production roll?
The two rolls are the same banding material — same color, width, thickness, and finish. The 54-foot roll is sized for a single project or a trial quantity; the 328-foot roll is the production format for shops running Crema regularly.
The Right Finish on Every Cut Edge
Matching the banding to the panel color is the detail that keeps a Crema cabinet reading as a finished piece rather than an assembled board. This short roll puts that match within reach for a single job, without the overhead of a full production quantity.
