328-Foot ABS Edgebanding Roll for Medium-Panel Casework and Shelving
This 43mm ABS edgebanding in Saviola color GSAH6 Crema is the factory-matched edge solution for Saviola TFL panels in the same decor. At 1 mm thick and wound on a 328-foot production roll, it is designed for cabinet shops and millwork operations running medium to large edgebanding jobs in this color.
Key Features
- Factory color match to Saviola GSAH6 Crema TFL panels — face and edge read as a single continuous surface after trimming.
- 43mm width — sized to cover a 19mm panel edge with enough overhang on each face to trim cleanly.
- 1 mm ABS thickness — substantial enough for a machine-applied bond while staying flexible enough to track a consistent glue line.
- Loom finish surface — a textile-inspired texture that aligns with the Crema panel's surface character.
- 328-foot production roll — a full-run quantity suited to production edgebanding equipment.
- Chlorine-free ABS material — clears specifications that exclude PVC from cabinetry interiors and commercial work.
Where This Edgebanding Fits the Job
The 43mm width is the go-to choice for 19mm panel stock, which covers the majority of cabinet box and shelf construction. When a run of Saviola Crema panels comes off the saw, this roll goes to the edgebander next — the color relationship is direct and the width is already correct for a standard flush trim. Shops building closet systems, open shelving, or commercial millwork in this color use the 43mm roll throughout the case and reserve the 23mm width for lighter edging where panel thickness calls for it. The 328-foot length handles a sustained production run without a mid-job roll change.
Material and Construction
ABS edgebanding is chlorine-free by nature, which matters in commercial and institutional specifications that restrict PVC from interior surfaces. The 1 mm thickness gives the banding enough body to resist impact at a finished cabinet edge without adding bulk that would complicate trimming. The Loom finish on this roll is matched to the texture of the GSAH6 Crema panel face, so the edge does not read as a separate component under raking light. Color and texture are both controlled at the source, not approximated from a third-party stock.
Who Orders This Roll
Production cabinet shops that stock Saviola Crema panels keep this roll on hand as a consumable matched to that color. Millwork operations specifying a warm neutral for commercial interiors order it alongside the panel. Smaller custom shops working a single kitchen or closet project in this decor use the 328-foot roll knowing the remainder has a long shelf life. Any buyer running a PVC-free specification finds the ABS material directly satisfies that requirement without a substitution conversation.
Does this banding require any special adhesive or edgebander setup?
Standard EVA or PUR hot-melt adhesive works with 1 mm ABS banding on most production edgebanders. No special setup is required beyond the normal temperature and feed-speed settings for 1 mm material. Check your machine manufacturer's parameters for ABS if you are switching from PVC, as optimal temperatures can differ slightly.
Is the 43mm width the right choice for panels thicker or thinner than 19mm?
For panels significantly thinner than 19mm, the 23mm roll in this same color is the appropriate width. For 19mm stock — the standard for cabinet box and shelf construction — 43mm gives you the overhang needed for a clean flush trim on both faces.
Can this roll be used on a hand iron or light-duty machine?
This roll is unglued and intended for production edgebanding equipment with a glue pot. It is not a pre-glued iron-on product. For site repairs or small-shop hand application, a pre-glued roll is the right format.
Is matching HPL available in GSAH6 Crema for countertop or high-wear surfaces?
Matching high pressure laminate is available for the Saviola collection. Contact your sales representative to confirm current sheet sizes and availability for this specific color.
The Right Edge for Every Crema Panel You Cut
A matched roll in the right width means the edge decision is already made when the panel hits the saw — the color is correct, the width is correct for 19mm stock, and the material clears a PVC-free spec. That is one fewer variable on a job that already has enough of them.
